- ページ 2

プリントサーバー Xerox Fiery EXP4110のPDF カスタマーリリースノートをオンラインで閲覧またはダウンロードできます。Xerox Fiery EXP4110 24 ページ。 Server & controller solutions printing from mac os
Xerox Fiery EXP4110 にも：オペレーター用マニュアル (1 ページ), 印刷オプション (24 ページ), 印刷マニュアル (24 ページ)

ページを印刷する

Setup

Disabling Web Services

Disable Web Services by disabling port 80. Re-enable port 80 using the Control Panel display.

FTP Proxy Setup

To use the FTP Proxy service, you must ﬁrst enable FTP Services.

Printing from Tray 5 (Bypass Tray) by default

To set a default for jobs to use the Bypass Tray, specify the tray at print time in the

printer driver.

WINS Address

The WINS Address does not appear in Conﬁgure in DHCP mode when you conﬁgure

Network Setup. Print a Conﬁguration page to see the WINS Address.

LDAP Server Setup

If you enable an LDAP Server in Setup, you must meet the following requirements:

• Make sure the LDAP Server IP address and host name are registered on the DNS server

and that DNS Setup is enabled on the Fiery EXP4110.

• You must enable the Fiery EXP4110 e-mail service to allow LDAP to access corporate

e-mail addresses from Remote Scan.

• In a Windows Server 2003 Active Directory DNS environment, add the Fiery EXP4110

to the Windows Active Directory Domain. Otherwise, the LDAP feature might not be

able to resolve the LDAP Server name. To specify the Windows domain, use the option in

Network Setup.

• Make sure the time difference between the LDAP Server and the System Time of the

Fiery EXP4110 is 5 minutes or less.

For more information about Setup options, see Conﬁguration and Setup and the WebTools

Conﬁgure Help.

Conﬁgure on Mac OS X

To use WebTools on Mac OS X, set the display resolution to 1280

Otherwise, some options in Conﬁgure might be hidden.

Member Printing (Printing Groups)

If Member Printing is enabled, you cannot download ﬁles to the Print queue from

Downloader, WebTools Print, or Command WorkStation, or using FTP Printing.

If Member Printing is enabled, do one of the following:

• Print directly from the application in which the ﬁle was created.

• Download the ﬁle to the Hold queue, change the owner information for the job with

Command WorkStation, and then send the job to print.

• Set the group name and password to the same values used to authenticate the FTP session,

and then print the job via FTP.

Page 2

1040 or higher.

Part Number: 45051581