- ページ 33

プリントサーバー Xerox FreeFlowのPDF セキュリティ・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox FreeFlow 38 ページ。 For color 560/570 printer
Xerox FreeFlow にも: インストレーション・マニュアル (34 ページ), パンフレット (2 ページ), リリースノート (23 ページ), インストールマニュアル (2 ページ), リリースノート (33 ページ), 重要なインストール情報 (2 ページ), ユーザーマニュアル (50 ページ), マニュアル (18 ページ), クイック・コネクト・マニュアル (2 ページ), キャリア手続きマニュアル (28 ページ)

Xerox FreeFlow セキュリティ・マニュアル
Network
Protocol
FTP
SSL
NFS

Secure Print

MICR mode

Security Guide
Access the server via FTP and/or submit jobs from a DigiPath/
FreeFlow client via the Digipath/FreeFlow Print Manager. This
service (ftpd) is shutdown when Xerox FreeFlow Print Server
security is set to high. In FreeFlow v2.0, the client has the ability
to use secure FTP (sFTP) when Xerox FreeFlow Print Server
security is set to high and FTP is not available. Connections
can also be filtered using the IP Filter feature under Setup ->
Security Profiles -> <Any Profile> -> RPC tab.
Required when using the TLS/SSL security feature and/or a
FreeFlow 2.0+ client with Xerox FreeFlow Print Server security
is set to high. Connections can also be filtered using the IP
Filter feature under Setup -> IP Filter.
Necessary when using NFS mounted directories. This service
is disabled when Xerox FreeFlow Print Server security is set to
high. Connections can also be filtered using the IP Filter feature
under Setup -> Security Profiles -> <Any Profile> -> RPC tab.
NOTE: The IP Filtering (Setup->IP Filter) feature can also help in
limiting access to the server. This is the Xerox FreeFlow Print
Server's GUI interface to the SunScreen Lite firewall that is part of
the Solaris 8 Operating System. This feature allows the user to
limit the number of clients who are allowed to access the server
via services such as LPR, IPP, HTTP, HTTPS, SMB Printing, and
FTP. By default, the firewall is disabled (all ports open), but can be
enabled to either only allow specified connections (by IP address,
IP address range, or subnet mask) or to close all ports. For DRW
clients, this mechanism exists under System Preferences ->
Remote Workflow -> "Enable Specified Connections".
NOTE: FreeFlow® v2.0 and newer allows users to select whether
or not the Xerox FreeFlow Print Server server they connecting to
will have high security enabled. If so, the client will use other
communication paths such as sIPP (via SSL) for job submissions
and sFTP for decomposition services (NetAgent).
The MICR mode disables all Xerox FreeFlow Print Server features
that allow additional prints to be produced (such as Sample Print,
Reposition Output, etc.).
Required
29