- ページ 27

プリントサーバー Xerox Nuvera 100のPDF プランニング・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox Nuvera 100 38 ページ。 Production system
Xerox Nuvera 100 にも: 仕様書 (2 ページ), 機能マニュアル (34 ページ), プランニング・マニュアル (22 ページ), ユーザーマニュアル (40 ページ), 操作マニュアル (34 ページ), リファレンス・マニュアル (2 ページ), プランニング・マニュアル (20 ページ), リファレンス・マニュアル (42 ページ), クイック・リファレンス (2 ページ), インストールマニュアル (2 ページ), 補足マニュアル (48 ページ), プランニング・マニュアル (16 ページ), リファレンス・マニュアル (2 ページ), 仕様 (2 ページ), ヒント・マニュアル (18 ページ), ヒント・マニュアル (18 ページ), スタートマニュアル (26 ページ), スタートマニュアル (30 ページ)

Xerox Nuvera 100 プランニング・マニュアル
C.P. Bourg Document Finisher (BDFx)

System Dependencies and Prerequisites

Configuration Guide

Printer Configurations
IOT
STACKER
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
The printer must be equipped with a Bypass Transport to
enable In-line Finishing.
It is highly recommended that the printer is equipped with a
Bourg Sheet Rotator (BSR) to maximize output.
Due to the height of the bypass transport on DocuPrint it is
not possible to attach the BCFx without the BSR.
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
BYPASS
STACKER
TRANSPORT
4-3
Finisher Configurations
BDFx
BCFx
BDFx
BCFx
BDFx
SQEDG
BSR
BSR
BDFx
BSR
BDFx
SQEDG
BSR
BCFx
BDFx
SQEDG
BDFx
SQEDG
BCFx
BDFx