- ページ 6

プリントサーバー Xerox Phaser 6100DNのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Xerox Phaser 6100DN 34 ページ。 Disk overwrite installation and usage
Xerox Phaser 6100DN にも: インストレーション・マニュアル (34 ページ), 仕様 (2 ページ), ユーザーマニュアル (32 ページ), パンフレット&スペック (4 ページ), ユーザーマニュアル (28 ページ), インストールマニュアル (2 ページ), セキュリティ・マニュアル (38 ページ), インストールマニュアル (2 ページ), リリースノート (2 ページ), スタートマニュアル (37 ページ), マニュアル (34 ページ), マニュアル (34 ページ), ユーザーマニュアル (32 ページ), 設置および操作マニュアル (8 ページ)

Xerox Phaser 6100DN スタートマニュアル
2
o Using the lp utilities for Solaris (using lp.pdf):
Contains the syntax and commands for using
the Unix lp print command to submit jobs to the
DocuSP controller.
o Using the lpr utilities for DOS and UNIX (using
lpr.pdf): Contains the syntax and commands for
using the command line lpr from either UNIX or
DOS to submit jobs to the DocuSP controller.
♦ Product specific folder(s): One or more product specific
folders are available on the user guide CD ROM. The
folders contain documents such as the printer Operator
Guide, Installation Planning Guides for electrical and
space requirements, plus additional documents as
necessary for the smooth operation of your printer. Access
the folder that matches the printer type you are using.
♦ DocuSP Online Help: The DocuSP software contains an
on-line Help system accessed from the various Help
buttons and pull-down menus on the DocuSP interface.
NOTE: The DocuSP Online Help has not been updated for
DocuSP 4.2. Therefore, the Online Help screens will be
labeled DocuSP 4.1 Online Help. Additional features not
documented in the Online Help are documented in the
DocuSP 4.1 to 4.2 Differences document.
In addition, a PDF version of the content of the on-line
Help is available on the DocuSP by accessing the Help
pull-down menu on the DocuSP user interface (UI). To
print on-line:
1. On the DocuSP UI, select the Help pull-down menu
and select Print Help Documentation.
2. Select a queue from the pull-down menu, and
select OK.
3. Send the documentation to a hold queue in order to
program the job properties, or send the job to a
queue with the following job properties set as
overrides:
Sides imaged = 2-sided
Finishing = none
Paper stock = 8 1/2 x 11 or A4; drilled if the
document is to be placed in a binder.
4. In Job Manager, locate the job and program the job
properties. Then, release the job to print.