- ページ 24
モーターサイクル Yamaha 2002 XJR1300のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha 2002 XJR1300 44 ページ。
ページを印刷する
N Secure the two positive (+) lead
wires of the battery, the nega-
tive(–) lead wire coupler of the
battery, and the wire harness by
use of this battery band.
O Clamp the wire harness to the
seat rail, on the wire harness
positioning tape and at the im-
mediate rear of the side cover
mounting bracket on the seat
rail.
The front end of the clamp must
face downward and be posi-
tioned inside the back stay.
CABLE ROUTING
P Store the wire harness, the tail-
light lead wire, and the rear left
and right flasher lead wires, into
the space between the taillight
bracket and the rib of the rear
fender.
Q The seat lock wire must not ex-
tend to the outside of the brack-
et.
R Pass the lead wire leading to the
fuse box under the wire harness.
17
SPEC
S After connecting the lead wire of
the thermoswitch, store the lead
wire into the space under the
wire harness.
T Clamp the wire harness to the
seat rail, on the wire harness
positioning tape and at the im-
mediate rear of the side cover
mounting bracket on the seat
rail.
The front end of the clamp must
face downward and be posi-
tioned inside the back stay.