- ページ 2
タイマー eControls WHFのPDF 住宅所有者とインストーラー・マニュアルをオンラインで閲覧またはダウンロードできます。eControls WHF 8 ページ。 Wall timer control kit
Before operating your Whole House Fan (WHF), always OPEN windows. See the WHF
Owners manual for more information. Your A/C should be off during WHF operation.
Turning the WHF ON or OFF
When the WHF is OFF, the LEDs on the wall timer are
not lit.
To turn the WHF ON, press the TIMER
WHF will go ON and an LED will indicate the number of
timer hours set, either 2, 4, 6 or 8.
To turn the WHF OFF, press the TIMER
WHF will go OFF and no LEDs will be lit.
Changing the Timer Hours
The wall timer remembers the last timer setting and
when the WHF is turned on, the wall timer will use this
timer setting.
To change the Timer Hours, PRESS and HOLD the
TIMER
SWITCH
to select the timer period. The LEDs
will cycle from 2 to 4 to 6 to 8 hours while the Timer
switch is pressed. RELEASE the TIMER
the desired number of hours is indicated. If the WHF was
on, it will remain on. If the WHF was off, setting the timer
will turn the WHF on.
HOMEOWNER
Viewing the Selected WHF Speed
To view the WHF speed, PRESS the SPEED
and the LED corresponding to the selected speed will be
lit. The wall timer will then return to displaying the timer
SWITCH
. The
hours.
Changing the WHF Speed
SWITCH
. The
To change the WHF speed, PRESS and HOLD the
SPEED
LEDs will cycle between the available speeds while the
Speed switch is pressed. RELEASE the SPEED
SWITCH when the desired speed is indicated.
If you have a Single Speed WHF:
The Speed switch will not change the speed and the
speed will remain as HI.
If you have a Two-Speed WHF:
SWITCH
when
The Speed switch will cycle between LO and HI.
If you have a Three-Speed WHF
The Speed switch will cycle between LO, MED and HI.
2
SWITCH
to select LO, MED or HI speed. The
SWITCH