- ページ 25

楽器 Yamaha 323のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha 323 50 ページ。 Yamaha owner's manual digital piano ydp-151, ydp-323

ページを印刷する

Recording your Performance

Your digital piano's recording function enables you to record your per-

formance of one song.

The recorded performance is called the "user song."

Follow the steps below to record and play back your performance.

Audio recording and data recording

Cassette tape recordings use a different data format than this instrument.

Cassette tapes record audio signals. On the other hand, this instrument

records information about the notes and voices being played and about the

timing and tempo of those notes. It does not record audio signals. When

you play back a recorded performance on this instrument, its internal tone

generator reproduces the sound according to the recorded information.

CAUTION

Be careful not to erase the recorded data:

After you record a performance on this instrument, the [PLAY] button indicator

lights up. When this indicator remains on, recording another performance will

erase the recorded data.

Procedure

Select a voice and other settings for the recording.

While holding down the

to select the desired voice(s). (See page 18.)

If you desire, you can select other settings, such as the reverb setting.

Use the

[MASTER VOLUME]

tening level. You can also use the

ume level during playback.

Engage Record mode.

Press the

[REC]

button.

Press the

button again if you wish to cancel Record mode.

[REC]

Start recording.

Recording starts as soon as you play the keyboard.

Alternatively, press the

Stop recording.

Press the

button.

[REC]

button, press one of the C1–A1 keys

[PIANO/VOICE]

control to adjust the volume to a comfortable lis-

[MASTER VOLUME]

[PLAY]

button to start recording.

control to adjust the vol-

YDP-151/YDP-323

You cannot engage Record mode

while a demo song is playing.

Recording capacity

"Recording capacity" is the

maximum amount of perfor-

mance data that you can

record. This instrument's

recording capacity is 65 KB

(approximately 11,000 notes).

Changing the settings for the

recorded user song

To change the settings for the

recorded user song, engage

Record mode, change the settings

as you desire, then stop recording

without playing the keyboard.

For example, if you wish to

change the voice of the user

song, press the [REC] button to

engage Record mode (see Step

2), then select a different voice

(see Step 1). Without playing the

keyboard, press the [REC] button

to stop recording (see Step 4).

CAUTION

Do not turn off the power to this

instrument while it is recording

the data in its internal memory

(that is, while the [REC] and

[PLAY] button indicators are

ﬂashing). Otherwise, all

recorded data, including the

data being recorded, will be lost.

You can save the recorded user

song to a computer. You can also

load the user song data from a

computer and play it back on this

instrument. (See page 31.)