- ページ 4

楽器 Yamaha 585のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha 585 28 ページ。 Compact disc automatic changer

ページを印刷する

Getting Started

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

Install this unit in a well ventilated, cool, dry, and clean place

with at least 5 cm above, behind and on the both sides of this

unit - away from direct sunlight, heat sources, vibration, dust,

moisture, and/or cold.

Position this unit away from other electrical appliances, motors

and transformers to avoid humming sounds, do not place this

unit where it may get exposed to rain or any kind of liquid to

prevent fire or electrical shock.

Avoid extreme temperature swings or excessive use of

humidifier in the room where this unit is installed to prevent

condensation inside this unit, which may cause an electrical

shock, fire damage to this unit, and/or personal injury.

Do not cover this unit with a newspaper, a tablecloth, a curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit and/

or personal injury.

Avoid installing this unit in a place where foreign objects and

liquid might fall. It might cause a fire, damage to this unit and/

or personal injury. Do not place the following objects on this

unit:

• Other components, as they may cause damage and/or

discoloration on the surface of this unit.

• Burning objects (i.e., candles), as they may cause fire,

damage to this unit and/or personal injury.

• Containers with liquid in them, as they may cause an

electrical shock to the user and/or damage to this unit.

Be sure to place this unit on a level surface. If not so, this unit

will fail to work normally and cause damage to the disc(s) and

this unit itself.

Do not use force on switches, controls or connection cables.

Never pull the cables when disconnecting them.

Only voltage specified on this unit must be used. Using this

unit with a higher voltage than specified is dangerous and may

result in fire or other accidents. YAMAHA will not be held

responsible for any damage resulting from the use of this unit

with a voltage other than that specified.

10 Do not attempt to clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

11 Disconnect the power cord from the wall outlet when not

planning to use this unit for a long period of time, or during an

electrical storm, as they may cause damage by lightning.

12 Do not attempt to modify or fix this unit. Contact the qualified

YAMAHA service personnel when any service is needed.

Cabinet should never be opened for any reasons.

13 Be sure to read 'Troubleshooting' section regarding common

operating errors before concluding that this unit is faulty.

DANGER

Visible laser radiation when open. Avoid direct exposure to beam.

When this unit is plugged to the wall outlet, do not place your eyes

close to the opening of the disc tray and other openings to look into

inside.

CAUTION

This unit is designed for home use only. Do not use this unit for

business purposes.

Caution for moving this unit

• When moving this unit, first remove all discs from the disc table

and close the table by pressing the OPEN/CLOSE button, and

then switch off the power after you confirm that the front panel

display indicates as follows.

2 3 4 5

Never switch off the power if the front panel display is not

pictured as above, otherwise the unit will break down during

moving because the internal mechanism is not locked.

Voltage selector [General model]

The voltage selector on the rear panel of this unit must be set for

your local main voltage BEFORE plugging into the AC power

supply. Voltages are 110/120/220/240 V AC, 50/60 Hz.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot

and fully insert.

This Class B digital apparatus complies with Canadian ICES-

003.

Special instructions for U.K. model

IMPORTANT:

The wires in the mains lead are coloured in accordance with the

following code:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows: The wire which is

coloured BLUE must be connected to the terminal which is

marked with the letter N or coloured BLACK. The wire which is

coloured BROWN must be connected to the terminal which is

marked with the letter L or coloured RED. Making sure that

neither core is connected to the earth terminal of the three pin

plug.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an appropriate

3 pin plug fitted. For details, refer to the instructions described

above.

Note: The plug severed from the mains lead must be destroyed, as

a plug with bared flexible cord is hazardous if engaged in a live

socket outlet.