- ページ 34

楽器 Yamaha Arius YDP-S31のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Arius YDP-S31 44 ページ。 Yamaha digital piano owner's manual
Yamaha Arius YDP-S31 にも：クイック・オペレーション・マニュアル (2 ページ), オーナーズマニュアル (44 ページ), (デンマーク語）ユーザーガイド (44 ページ)

Keyboard Stand Assembly

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accor-

dance with the sequence given below.

• Assembly should be carried out by at least two persons.

• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage.

• Be sure to tighten up all screws upon completing assembly of each unit.

• To disassemble, reverse the assembly sequence given below.

Have a phillips-head (+) screwdriver of the

appropriate size ready.

Remove all parts from the box. Conﬁrm that all parts shown in the illustration are provided.

Attach B to C.

1-1 Set B onto C with the black rim of the

indentation on B facing front.

1-2 Thread the thin screws (5 x 20 mm) through

the spacers, then temporarily secure B and C

from the rear using these screws.

* This illustration shows the view from the rear of B

and C.

YDP-S31 Owner's Manual

* The adaptor may not be included, or may look different from the illustration above,

depending on your particular area. Please check with your Yamaha dealer.

AC Power Adaptor* x 1

6 x 30mm long screws x 4

6 x 20mm short screws x 4

Anti-fall brackets* x 2

Attach B to D and E.

2-1 Align D and E with each end of B.

2-2 Attach D and E to B by tightening the long

screws (6 x 30 mm) securely.

5 x 20mm thin screws x 2

Spacers x 2

Cord holders x 5

* The two anti-fall brackets are

identical. (Either one can be

used for left or right.)