- ページ 33

楽器 Yamaha ARIUS YDP-S34のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha ARIUS YDP-S34 40 ページ。
Yamaha ARIUS YDP-S34 にも：クイック・オペレーション・マニュアル (2 ページ), ミディ・リファレンス (14 ページ)

ページを印刷する

6-1

6-2

6-3

Insert the pedal cord securely

until the metal part of the cord

plug disappears from view.

Otherwise, the pedal may not

function properly.

Connect the AC adaptor.

Insert the AC adaptor plug into the DC IN jack

from the rear.

Set the adjuster.

Rotate the adjuster until it comes in firm contact

with the floor surface.

After completing the assembly, please check the

following.

• Are there any parts left over?

 Review the assembly procedure and correct any errors.

• Is this instrument clear of doors and other

movable fixtures?

 Move the instrument to an appropriate location.

• Does this instrument make a rattling noise when

you shake it?

 Tighten all screws.

• Does the pedal box rattle or give way when you

step on the pedals?

 Turn the adjuster so that it is set firmly against the floor.

• Are the pedal cord plug and the adaptor plug

inserted securely into the sockets?

 Check the connection.

• If the main unit creaks or is otherwise unsteady

when you play on the keyboard, refer to the

assembly diagrams and retighten all screws.

When moving the instrument

CAUTION

• When moving the instrument after assembly, always

hold the bottom of the main unit.

• Do not hold the key cover or top portion. Improper

handling can result in damage to the instrument or

personal injury.

NOTICE

Rotate the adjuster under the pedal until it separates

from the floor surface. Contact with the adjuster can

result in damage to the floor surface.

Do not hold here.

Hold here.

Transporting

If you move to another location, you can transport the

instrument along with other belongings. You can move the

unit as it is (assembled), or you can disassemble the unit

down to the condition it was in when you first took it out of

the box. Transport the keyboard horizontally. Do not lean

it up against a wall or stand it up on its side. Do not subject

the instrument to excessive vibration or shock. When

transporting the assembled instrument, make sure all

screws are properly tightened and have not been loosened

by moving the instrument.

CAUTION

If the main unit creaks or is otherwise unsteady when you

play on the keyboard, refer to the assembly diagrams and

retighten all screws.

Keyboard Stand Assembly

YDP-S34 Owner's Manual