- ページ 6

楽器 Yamaha AVANT GRAND N1のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha AVANT GRAND N1 50 ページ。

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply/Power cord

• Do not place the power cord near heat sources such as heaters or radiators, and

do not excessively bend or otherwise damage the cord, place heavy objects on it,

or place it in a position where anyone could walk on, trip over, or roll anything

over it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

Do not open

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

Power supply/Power cord

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

Assembly

• Read carefully the attached documentation explaining the assembly process.

Failure to assemble the instrument in the proper sequence might result in

damage to the instrument or even injury.

Location

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• When transporting or moving the instrument, always use two or more people.

Attempting to lift the instrument by yourself may damage your back, result in

other injury, or cause damage to the instrument itself.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

6 • N1

Owner's Manual

PRECAUTIONS

• Do not expose the instrument to rain, use it near water or in damp or wet

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

• When one of the following problems occur, immediately turn off the power switch

• Before connecting the instrument to other electronic components, turn off the

• Be sure to set the volumes of all components at their minimum levels and

• Do not insert a finger or hand in any gaps on the fallboard or instrument. Also

• Never insert or drop paper, metallic, or other objects into the gaps on the

• Do not rest your weight on, or place heavy objects on the instrument, and do not

• Do not use the instrument/device or headphones for a long period of time at a

• Do not place the bench in an unstable position where it might accidentally fall over.

• Do not play carelessly with or stand on the bench. Using it as a tool or stepladder

• Only one person should sit on the bench at a time, in order to prevent the

• Do not attempt to adjust the bench height while sitting on the bench, since this can

• If the bench screws become loose due to extensive long-term use, tighten them

1/2

DMI-3

Water warning

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

Fire warning

A burning item may fall over and cause a fire.

If you notice any abnormality

and disconnect the electric plug from the outlet. Then have the device inspected

by Yamaha service personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the instrument.

Connections

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

gradually raise the volume controls while playing the instrument to set the

desired listening level.

Handling caution

take care that the fallboard does not pinch your finger.

fallboard, panel or keyboard. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

use excessive force on the buttons, switches or connectors.

high or uncomfortable volume level, since this can cause permanent hearing loss.

If you experience any hearing loss or ringing in the ears, consult a physician.

Using the bench (If included)

or for any other purpose might result in accident or injury.

possibility of accident or injury.

cause excessive force to be imposed on the adjustment mechanism, possibly

resulting in damage to the mechanism or even injury.

periodically using the included tool.