- ページ 37

楽器 Yamaha AvantGard N1のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha AvantGard N1 50 ページ。 Hybrid piano
Yamaha AvantGard N1 にも：メンテナンス・ハンドブック (45 ページ)

ページを印刷する

CAUTION

• Be careful not to confuse parts, and be sure to install all

parts in the correct direction. Please assemble the unit in

the appropriate sequence.

• Assembly should be carried out by at least two persons.

• Be sure to use only the included screws. Do not use any

other screws. Inappropriate screws may cause damage or

malfunction of the product. Be sure to insert screws of the

proper size in the correct hole locations.

• Be sure to tighten all screws upon completing assembly of

each unit.

• To disassemble, reverse the assembly sequence.

Have a Phillips-head (+) screwdriver of the appropriate size ready.

Remove all parts other than the main unit from the box.

Confirm that all parts shown in the illustration are pro-

vided. Do not remove the main unit from the box prior to

step 3.

Leg (L)

Speaker box

Be sure to lay the packaging sheet

or other protective sheet on the

floor and under the instrument.

6 × 30 mm

6 × 20 mm

long screws × 10

short screws × 6

Attach the legs to the speaker box.

1-1 Attach the leg (L) to the side of the speaker box

using three short screws (6 x 20 mm).

1-2 While pressing the bracket on the leg against the

speaker box, securely tighten the screws that were

attached.

1-3 Follow the same steps to attach the leg (R).

Assembling the Unit

Main Unit

Leg (R)

AC power cord × 1

1-1

1-2

1-4 Raise the speaker box.

Detach the speaker net.

2-1 Remove the two screws. These screws are used in

step 6.

2-2 Detach the speaker net.

Mount the main unit.

3-1 Mount the main unit on the speaker box while

aligning the rear of the main unit with the rear of the

speaker box, and each lateral side of the main unit

with the lateral side of the legs.

CAUTION

Be careful not to pinch your fingers when mounting the

main unit.

Do not hold here.

2-2

2-1

Hold here.

• 37

Owner's Manual