- ページ 5

楽器 Yamaha CH-500のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha CH-500 7 ページ。 Chimes; chimes stand
Yamaha CH-500 にも：オーナーズマニュアル (6 ページ)

CH-500/CHS-520

Insert the side columns into the base. At this time,

make sure that the damper rest, attached at the

center of the column, and the short section of the

column is positioned upright.

Damper Rest

Short Section

Side Column

Long Section

ASSEMBLY PROCEDURE

Fit the damper onto the side columns and lower

the damper onto the damper rest. Next, secure

the damper in its position with the damper wing

bolts. At this time, tighten the wing bolts that se-

cure the side column to the base as well.

Damper

Base

Remove the damper stay, attached to the bottom

of the damper, loosen the wing bolt on the damper

stay, and attach the stay to the pedal hook. The

pedal's position can be controlled by adjusting the

length of the pedal stay with its two wing bolts. At

this time, tighten the upper wing bolt first, then go

on to tighten the lower bolt.

Adjust the pedal position so that the pedal stops

slightly above the floor when fully depressed.

Damper Stay

Side Column

Damper Rest

Damper Stay

Pedal Hook

Base