- ページ 17

楽器 Yamaha Clavinova CLP-670のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Clavinova CLP-670 24 ページ。 Clavinova
Yamaha Clavinova CLP-670 にも：オーナーズマニュアル (24 ページ), オーナーズマニュアル (24 ページ), オーナーズマニュアル (24 ページ)

ページを印刷する

* Keys C1 through D*2 on the keyboard are used to set the

MIDI transmit channel, and keys C3 through D#4 are used

to turn the ONMI mode OFF and set the MIDI receive channel

as shown in the illustration below. The E4 key sets the OMNI

receive mode and basic receive channel 1.

Note: When the power is initially turned ON, MIDI receive is set

to the OMNI mode and the transmit channel is set to 1.

MIDI FUNCTION CHART

CLP-670

CLP-570

—

Selector*

Local ON/OFF

Program Change ON/OFF

PIANO 2

E.PIANO

HARPSICHORD

Control Change ON/OFF

| E .

Multi-Timbre Mode

plit & Left Local OFF

HARPSICHORD

1| CELESTA

Split & Right Local OFF

|HARPSICHORD 2| VIBES

Panel Data Transmit

JCELESTA

GUITAR

* The MIDI

functions listed above are engaged by holding

down the TRANSPOSER/MIDI

button and pressing the cor-

responding voice selector. Full details are given in the follow-

ing pages.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the Clavinova

keyboard

controls

its internal

tone

generator,

allowing

the

internal voices to be played directly from the keyboard. This

situation is "Local Control ON" since the internal tone generator

is controlled locally by its own keyboard.

Local control can be turned OFF, however, so that the Clavinova

keyboard does not play the internal voices, but the appropriate

MIDI

information

is still transmitted

via the MIDI

OUT

connector when notes are played on the keyboard. At the same

time, the internal tone generator responds to MIDI information

received via the MIDI IN connector. This means that while an

external MIDI sequence recorder such as the Yamaha EMQ-1

: Memory Box, for example, plays the Clavinova's internal voices,

an external tone generator such as the EMT-1

can be played

from the Clavinova keyboard.

EMT-1 FM Sound Box

(played from Clavinova

keyboard)

LAN

Clavinova

{Local Control OFF, played from EMQ-1

Memory Box}

Turning Local Control ON or OFF

1. Hold down the TRANSPOSER/MIDI button.

2. Press the PIANO 1 voice selector. If the PIANO

1 LED is

lit when the PIANO

1 voice selector is pressed, you have

turned local control OFF.

If the PIANO

1 LED is not lit

when the PIANO 1 voice selector is pressed, you have turned

local control ON.

3. Release the TRANSPOSER/MIDI

button.

Program Change ON/OFF

Normally the Clavinova will respond to MIDI program change

numbers

received from an external keyboard or other MIDI

device, causing the correspondingly numbered Clavinova voice

to be selected. The Clavinova will normally also send a MIDI

program change number whenever one of its voices is selected,

causing the correspondingiy numbered voice or program to be

selected on the external MIDI device if the device is set up to

receive and respond to MIDI program change numbers.

This function makes it possible to cancel program change number

reception and transmission so that voices can be selected on

the Clavinova without affecting the external MIDI device, and

vice versa.

1. Hold down the TRANSPOSER/MIDI

button.

2. Press the PIANO 2 voice selector. If the PIANO 2 LED is

lit when the PIANO 2 voice selector is pressed, you have

turned program change reception/transmission OFF. If the

PIANO 2 LED is not lit when the PIANO 2 voice selector

is pressed, you have turned program change reception/trans-

mission ON.

3. Release the TRANSPOSER/MIDI

button.

Control Change ON/OFF

Normally the Clavinova will respond to MIDI control change

data received from an external MIDI device or keyboard, caus-

ing the selected Clavinova voice to be affected by pedal and

other ''control'' settings received from the controlling device.

The Clavinova also transmits MIDI control change information

when either of its pedals are operated.

This function makes it possible to cancel control change data

reception and transmission if you do not want the Clavinova

voices to be affected by control change data received from an

external device or vice versa.

1. Hold down the TRANSPOSER/MIDI

button.

2. Press the E.PIANO

1 (E.PIANO

on the CLP-570)

voice

selector. If the E.PIANO

1 (E.PIANO) LED is lit when the

E.PIANO

1 (E.PIANO) voice selector is pressed, you have

turned control change reception/transmission OFF. If the

E.PIANO 1 (E.PIANO) LED is not lit when the E.PIANO 1

(E.PIANO) voice selector is pressed, you have turned control

change reception/transmission ON.

3. Release the TRANSPOSER/MIDI

button.

The Multi-Timbre Mode

The Multi-Timbre mode is a special mode in which the Clavinova

voices can be independently controlled on different MIDI chan-

nel numbers (1 through 10) by an external MIDI device such as

the Yamaha EMQ-1 Memory Box. The Multi-Timbre mode can

be activated as follows:

1. Hold down the TRANSPOSER/MIDI

button.

2. Press the E. PIANO 2 (HARPSICHORD

on the CLP-570)

voice selector. If the E. PIANO 2 (HARPSICHORD) LED

is lit when the E. PIANO 2 (HARPSICHORD) voice selector

is pressed, you have turned the Multi-Timbre mode ON. If

the E. PIANO 2 (HARPSICHORD) LED is not lit when the

E. PIANO

2 (HARPSICHORD)

voice selector is pressed,

you have turned the Multi-Timbre mode OFF.

3. Release the TRANSPOSER/MIDI

button.

Here's an example of how you could use the Multi-Timbre mode

to record three different parts on the EMQ-1 Memory Box that

will play different voices on the Clavinova when played back.

1. Connect the EMQ-1 to the Clavinova as shown below.

TIITTTTI

Clavinova

EMO-1 Memory Box