- ページ 36

楽器 Yamaha Clavinova CLP-820SのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Clavinova CLP-820S 40 ページ。 Clavinova

The Function Mode

IdJ

F7.5/FB.5: Control Change ON/OFF ........................................................................................

Normally the Clavinova will respond to MIDI control change data received from an

external MIDI device or keyboard, causing the voice on the corresponding channel to be

affected by pedal and other "control" settings received from the controlling device (the key

board voice is not affected). The Clavinova also transmits MIDI control change information

when one of its pedals or other appropriate controls are operated.

This function makes it possible to cancel control change data reception and transmission so

that, for example, the Clavinova pedals and other controls can be operated without affecting

an external MIDI device.

Use the [-/NO] and [+/YES] buttons to tum control change transmission and reception

"On" or "OFF".

Press the [-iNO] and [+/YES] buttons simultaneously to recall the default setting "On".

tlil

NOTE

1 •

For information on control changes that can be used with the Clavinova, refer to the MIDI Data

Format on page 43.

F7.6/FB.6: MIDI Transmit Transpose .......................................................................................

This function allows the MIDI note data transmitted by the Clavinova to be transposed up

or down in semitone increments by up to plus or minus 12 semitones. The pitch of the

Clavinova itself is not affected.

Use the [-/NO] and [+/YES] buttons to set the desired amount of MIDI transmit transposi

tion. The range is from "-12" (down one octave) through "0" (no transposition) to "12" (up

one octave).

Press the [-!NO] and [+/YES] buttons simultaneously to recall the default setting "0".

F7.7/FB.7: Panel/Status Transmit ...............................................................................................

This function causes all the current Clavinova panel settings (selected voice, etc.) to be

transmitted via the MIDI OUT terminal. This is particularly useful if you will be recording

performances to a MIDI sequence recorder such as the Yamaha MIDI Data Filer MDF3 which

. will be used to control the Clavinova on playback. By transmitting the Clavinova panel set

tings and recording them on the MIDI sequence recorder prior to the actual performance data,

the Clavinova will be automatically restored to the same settings when the performance is

played back.

Press the [+/YES] button to transmit the panel/status data.

will appear on the LED

display when the data has been successfully transmitted.

tlil

NOTE

1 •

See page

for list of the "Panel Data Contents" transmitted by this function.

• Panel setting data that is transmitted to an external device can only be reloaded on a model of the

same type. Panel setting data can also be directly transferred to or from instruments of the same

model type.

IdJ

F7.B/FB.B: Bulk Data Dump ...............................................................................................................

This function is used to transmit all data stored in the Recorder memory to a MIDI data

storage device such as the Yamaha MIDI Data Filer MDF3, other sequence recorders, or MIDI

compatible computers.

Press the [+/YES] button to begin bulk transmission.

nd" will appear on the LED

display when the data has been successfully transmitted.

tlil

NOTE

1 •

Bulk data dump will not function when the recorder is in operation.

• Recorder data that is transmitted to an extemal device can only be reloaded on a model of the same

type. Recorder data can also be directly transferred to or from instruments of the same model

type.

• The reload operation cannot be executed when

thp. Rp.,.,nrrl",r i" in

nn"'r~tir""

nr , ...

on~"~_

---'- :