楽器 Yamaha disklavier DKC-850のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Yamaha disklavier DKC-850 2 ページ。 Internet connection guide
Yamaha disklavier DKC-850 にも： データ一覧 (16 ページ), 機能マニュアル (13 ページ), 更新マニュアル (5 ページ), 更新マニュアル (45 ページ), インターネット接続マニュアル (2 ページ), 接続マニュアル (6 ページ), ユーザーマニュアル (22 ページ)
ページを印刷する
6/4/2011
Online Services
DKC-850 INTERNET CONNECTION GUIDE
Connection Example
With Router Function
Instructions
ATTACH
ETHERNET CABLE
To your modem or
router
ATTACH
ETHERNET CABLE
To your Disklavier
PRESS
Still can't connect? Follow these instructions...
PRESS
...yamaha.com/connect.html?type=radi...
Yamaha: Connect to Radio Service For ...
Without Router Function
Modem (with router function)
Modem (without router function)
Router/hub
Other device (such as computer)
LAN cable
I/O Center (right side)
To set up the connection, attach one end of the Ethernet cable to a
free port on your modem or router.
Attach the other end of the cable to the Ethernet port on your
Disklavier. The location of the port is shown here.
Press the [Internet] button. Congratulations, you are now
connnected. You should see the Internet Direct Connection home
page.
If you see a screen saying that you are not successfully connected,
you may need to set up your instrument to connect to your
network. To do so, press [Setup], then [Network] from your remote
control.
On the network screen, you can update your DHCP, DNS, Proxy and
manual IP settings. In most cases you will not need to edit these
settings.
Unless you are manually assigning DNS or IP locations for your
1/2