- ページ 14

楽器 Yamaha disklavier MX-100BのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha disklavier MX-100B 50 ページ。

MX-100B

Adjusting the Various Units

1. Adjusting the key drive unit

Forward/backward adjustment

Push the unit against the front surface of the key back rail.

Left/right adjustment

Install keys 2, 50, and 87, then align the key drive unit so that each solenoid is the center of the

corresponding key.

Height adjustment

Install keys except for those located at the adjustment screws

that the gap at the upper surface of the key drive unit is 2 mm.

Procedures marked with

the disklavier.

1. Adjusting the key drive unit

2. Adjusting the key stop rail

3. Adjusting the pedal drive unit

4. Adjusting the pedal cushion unit

5. Adjusting the hammer sensor unit

6. Adjusting the key sensor unit

7. Adjusting the pedal sensor unit

8. Adjusting the mute unit

are very important processes for bringing out the full capabilities of

Key Drive unit

Keyboard

Key back rail

Key bed

Adjustment screws 4 x 75

Spacer

Nut

, and adjust the screws