- ページ 6

■ Control and Monitoring

In the DME CONTROL-SETUP screen, click 'CONNECT' and

select the type of component to be edited here.

Choose the name of the

component to be edited here.

DME scenes can be recalled from here. And scenes can be

stored (but they can only be overwritten if they already exist:

new scenes cannot be created).

So one tip is to create several 'spare' scenes containing the

initial data, which can be overwritten if needed.

Click here to control the GEQ or MATRIX mixer with the DCA faders

(or press SHIFT+FADER MODE on PM5D).

Press to activate the DME monitor in the PM5D CUE bus.

This indicator will appear.

PM5D & DME64N CASCADE / Mode 1: Remote Control & Bi-directional Audio

In the Monitor Out box of DME Designer (in the Tools menu of

the main window), select a spare cascade port to use to link the

DME monitor to the PM5D CUE bus.

For PM5D, in the DME CONTROL-SETUP screen, select the

same cascade port as the MONITOR PORT, so you can hear the

DME monitor in the PM5D CUE bus.

6/34