- ページ 5

Here is a list of functions that are not mirrored, but will need to be

edited on each console separately if necessary. Or...set them up on

one console and transfer them to the other console via memory card or

Studio Manager:

• LOAD/SAVE to Memory Card (in [DATA] menu)

• Some [SETUP] functions in the PREFER2 and PREFER3 menus:

• MIDI/HOST settings in [SETUP] menu

• INPUT PORT NAME, OUTPUT PORT NAME, TIME REF, TIME

SEG settings in [SETUP] menu

• CH STATUS and LOCK functions in [UTILITY] menu

• CH NAME settings in INPUT PATCH and OUTPUT PATCH menus

• MIDI SETUP, Program Change Table, Control Change Table,

BULK DUMP settings in the [MIDI] menu

• PLUG INS in the [EFFECTS/PLUGINS] menu

• SCENE MEMORY SORT and PASTE functions

• AUTOMIX functions

• USER DEFINED KEY assignments (though BANK SELECT is

mirrored)

• LOCATOR functions

• MIX C-R SOURCES and MIX MONITOR SOURCES functions in

the [MONITOR] menu.

• ENCODER MODE / FADER MODE / AUX SELECT / MATRIX

SELECT

• Currently displayed menu.

TIP

And of course with DM2000, remember that the analog input GAIN,

+48V, PAD, INSERT of channels 1-24 need to be set individually on

each console, and there is no way to copy these with a memory card or

with Studio Manager: they must be set manually.

Why not use the CASCADE function?

In this case, the CASCADE function should not be used. CASCADE

links the output buses of both consoles together, and can link display

pages, ENCODER MODE and FADER MODE and so on, but it does

not mirror the mixing parameters. Instead, it makes both consoles

work like one big console with twice the number of input channels, but

no extra output channels.

YAMAHA Digital Mixers: A Redundancy Guide

o SET Time & Date; Sensitivity; Display Brightness;

o SMPTE/MTC Settings; Insert Time Link to Locate

Memory