- ページ 11
楽器 Yamaha DTX500KのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha DTX500K 48 ページ。 Drum trigger module
ページを印刷する
NOTICE
• Whenever making connections, make sure that the plug
on the cable being used corresponds to the type of jack
on the device.
● OUTPUT L/MONO, R jacks (standard mono phone)
These jacks allow you to connect the
DTX500 to an external amplifier + speak-
ers and produce full, amplified sound, or
connect the DTX500 to audio recording
equipment for recording your own perfor-
mance.
* Use the DTX500's OUTPUT L/MONO jack when connect-
ing to a device with a mono input.
● PHONES jack
(standard stereo phone jack)
Use the VOLUME knob on the rear panel
to adjust the headphone volume.
CAUTION
• Do not use the DTX500 at a high volume level for a long
period of time, or your hearing may be damaged.
● AUX IN jack (stereo mini phone jack)
The audio output from a MP3 player or
CD player connected to the AUX IN jack
can be mixed with the sound of the
DTX500 and transmitted via the OUT-
PUT jacks or PHONES jack. This jack
can be used when you want to play along
with your favorite songs.
* Use the volume control on the external device (MP3 player,
etc.) to adjust the volume balance.
● MIDI OUT jack
The MIDI functions on the DTX500 lets you play voices on an
external tone generator with the pads of the DTX500, or synchro-
nize the DTX500's song or click playback with the playback of
an external sequencer.
About MIDI
MIDI (Musical Instrument Digital Inter-
face) is a worldwide standard that enables
you to connect instruments and comput-
ers—of different manufacturers and differ-
ent types—and transmit performance and
other data among them.
* Also, use a MIDI cable that is not more than 15 meters in
length. Using a longer cable may result in irregular operation
and other problems.
4 Turning the Power On
4-1. Make sure the volume settings of the DTX500 and external
devices are turned down to the minimum.
4-2. Turn the power on (>) by pressing the
Switch on the rear panel of the DTX500, then turn on the
power of the amplifiers.
4-3. To turn off the power, press the
again.
CAUTION
• Even when the instrument is turned off, electricity is still
flowing to the instrument at the minimum level. When you
are not using the DTX500 for a long time, make sure to
unplug the AC power adaptor from the wall AC outlet.
● Connecting a Mixer or MIDI Devices
Make sure that all volume settings are turned down all the way to
the minimum. Then turn on the every device in your setup in the
order of MIDI masters (controllers), MIDI slaves (receivers),
then audio equipment (mixers, amplifiers, speakers, etc.).
When powering down the setup, first turn down the volume for
each audio devices, then switch off each device in the reverse
order (first audio equipment, then MIDI).
1
DTX500 (MIDI Master)
8. 8 . 8 .
~~~~~YAMAHA
~~~~
~~~
DTX
drums~~
3
Audio equipment
(first mixer, then amplifier)
1 Connections
Standby/On
Standby/On Switch
2
MIDI slave
11
DTX500 Owner's Manual