- ページ 9

楽器 Yamaha DTX520KのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha DTX520K 48 ページ。 Dtx drums
Yamaha DTX520K にも：組立マニュアル (2 ページ), 組立マニュアル (2 ページ)

ページを印刷する

Rear Panel

!2 MIDI OUT jack

For sending data from the DTX500 to an external MIDI device.

With this jack, you can use the DTX500 as a control device to

trigger voices from an external tone generator, or synchronize

song playback or the click of the DTX500 with the playback of

an external sequencer. (p. 11)

!3 Trigger Input jacks (1SNARE thru 8KICK/9)

For connecting pads or drum triggers (Yamaha DT20, etc.) to

receive trigger signals.

Connect external pads such as a snare, tom, etc., according to the

indication below each input. (p. 10)

1SNARE ..................... Compatible with three-zone pads and the pad

controller.

2TOM1/ 0, 3TOM2/ !, 4TOM3/ @, 8KICK/ 9

.............................. Mono x 2 inputs

A Y-shaped cable (stereo plug—mono jack x

2; refer to the illustration below) can be used to

trigger inputs 9, 0, !, and @ (monaural

pad). Also, if the KP125W/125/65 kick pad is

connected to this jack with a stereo cable, the

external pad input jack on the KP125W/125/65

can be used as the input for input jacks 9, 0,

!, or @.

5RIDE, 6CRASH ..... Compatible with three-zone pads.

7HI HAT ..................... Compatible with stereo pads (with switches)

● Y-shaped cable

Stereo phone plug

!4 Hi-hat controller jack (HI HAT CONTROL)

For connecting a hi-hat controller.

* Use a cable with a stereo plug (shown below) when connect-

ing a hi-hat controller.

Double insulator

!5 Output jacks (OUTPUT L/MONO, R)

For connecting the DTX500 to an external ampliﬁer, mixer, etc.

For mono playback use the L/MONO jack. For stereo playback

connect both L and R jacks. (p. 10)

!6 Headphones jack (PHONES)

Connect a set of stereo headphones to this jack to monitor the

DTX500. (p. 10)

!7 AUX IN jack

Connect the output of an external audio device, etc., to this jack

(stereo mini jack). (p. 11)

This is convenient for playing along with music from a CD

player, etc.

* Use the volume control on the external device to adjust the

volume balance.

!8 Master Volume (VOLUME)

Adjusts the DTX500's overall volume (output level of the signal

sent via the OUTPUT jacks and PHONES jack). Rotate the knob

clockwise to increase the volume, or counter-clockwise to

decrease it.

!9 DC IN terminal (12V)

Connect the supplied AC power adaptor to this terminal. To pre-

vent the adaptor from becoming unplugged, secure the cable to

the cable clip.

@0 Cable clip

Mono phone jack

Prevents the power cord from accidentally becoming unplugged.

(p. 10)

Mono phone jack

The power is turned on when the button is set to this position:

(>). The power is off when set this way: (?).

Controls and Functions

Standby/On Switch

DTX500 Owner's Manual