- ページ 13

楽器 Yamaha DX27SのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha DX27S 25 ページ。 Digital programmable algorithm synthesizer
Yamaha DX27S にも：ボイス・プログラミング・マニュアル (19 ページ), オーナーズマニュアル (26 ページ), オーナーズマニュアル (39 ページ), オーナーズマニュアル (25 ページ), ユーザーマニュアル (19 ページ)

ページを印刷する

ቾ Note that performance parameters 13 through 24 can be set differently for each

individual voice.

Once you have changed any of these function parameters for a

particular voice, you can save your new settings with the INTERNAL voice by using

the STORE function.

(see CHAPTER IV:

VOICE PROGRAMMING,

4. Storing

Voice Data).

13: POLYIMONO

POLY /MONO

This function selects either the POLY or MONO output mode. Voices programmed

with the POLY mode will let you play up to 8 notes. In the MONO

mode, the

DX27/27S acts as monophonic keyboard.

Once the POLY/MONO

function is selected, subsequent presses of button #13

will alternate between the POLY and MONO

modes. The DATA

ENTRY

buttons

can also be used; the —1 button selects POLY and the +1 button selects MONO.

14: PITCH BEND RANGE

PITCH

BEND

RANGE

This function sets the pitch range of the Pitch Bend Wheel located at the upper

left of the DX27/27S panel. The Pitch Bend Wheel automatically centers at normal

pitch. Moving the Wheel upward (away from thé player) will raise the pitch, and

moving it downward

(toward the player) will lower the pitch.

These pitch bend

directions can also be reversed by holding down the PITCH B MODE button while

switching the DX27/27S

power ON. This provides the same depth of effect but

in the opposite direction of wheel movement. This can be useful in performance

situations.

The data range is from O to 12. At O, the Pitch Bend Wheel is off and will have

no effect.

Each increment between 1 and 12 represents a semitone (i.e. the pitch

variation between any white key and a black key immediately next to it). Thus, if

this function is set to 12, maximum travel of the Pitch Bend Wheel either above

or below it's center position will produce a one-octave pitch variation.

Тһе DATA ENTRY slider and —1/+1

buttons can be used to enter the data. Once

the PITCH

BEND

RANGE function is called, subsequent presses of button 414

will increment (increase) the data value.

P B MODE: MODE SET

MODE SET

This function button, located immediately above the DATA ENTRY --1 button, offers

a choice of three Pitch Bend Wheel modes:

Low, High and Kon. In the Low mode,

the Pitch Bend Wheel affects only the lowest note played on the keyboard. In other

words, if a chord is played, the Pitch Bend Wheel will affect only the pitch of the

lowest note in the chord—this makes it possible to produce some interesting effects.

The High mode is just the opposite, only the highest note played will be affected

by the Pitch Bend Wheel. in the Kon (Key on) mode, all notes played are affected

by the Pitch Bend Wheel.

The DATA

ENTRY slider, the –1/+1

buttons and the PB MODE

button can be

used to select the desired mode.