- ページ 11
楽器 Yamaha SILENT Bass SLB300 PROのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha SILENT Bass SLB300 PRO 24 ページ。
ページを印刷するNOTE
• When using passive output with the power switch off, the signal output decreases relative to the length of
the connected cable. When using the SRT POWERED preamplifier with the power switch on, the cable
length has virtually no effect on the signal output.
NOTICE
• Turn the power off or turn the output volume all the way down for any connected amplifier, powered
speaker, or the like before turning the power for this product on or off.
w [VOLUME] knob
This adjusts the volume.
e Status display LED
This displays information such as the BYPASS function status, SRT POWERED microphone
type, and remaining battery power. The LED status can be checked from the diagonal direction
(performance posture) relative to the knob.
Status
Power switch on
Switch to microphone type 1
and check selection status
Switch to microphone type 2
and check selection status
Switch to microphone type 3
and check selection status
Using bypass
Out-of-battery warning
r [TREBLE] knob
This adjusts the level of the upper frequencies (TREBLE). This uses a peaking filter to amplify or
decrease the characteristic frequencies optimized for this product.
• Turn to the right to create a brighter sound that can cut through the sound of other instru-
ments in a band.
• Turn to the left for a soft, natural sound fit for bowing.
t [BASS] knob
This adjusts the level of the lower frequencies (BASS). This uses a peaking filter to amplify or
decrease the fundamental frequencies mainly of the 3rd and 4th strings.
• Turn to the right to emphasize the low frequencies and create a warm, fat sound.
• Turn to the left to cut the low frequencies for a clean sound that does not clash with other low-
pitched instruments.
(directly beneath the volume control knob)
Orange
Flashes based on
microphone type
Flashes 1 time
Flashes 2 times
Flashes 3 times
Green
–
–
–
–
–
On
–
–
SLB300 PRO SLB300 Owner's Manual
Red
–
–
–
–
–
Flashes
10