- ページ 7

楽器 Yamaha Silent Violin SV-200のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Silent Violin SV-200 16 ページ。 Yamaha silent violin owner's manual

The Silent Violin is shipped from the factory with the bridge unfitted.

First, set up the bridge and then proceed with tuning.

• The lower side of the bridge supports the 1st string (E),

the higher side supports the 4th string (G). Make sure

the bridge is placed properly, then set the bridge in the

bridge seat. (Make sure the logo side of the bridge is

facing the tailpiece.)

• Make sure the entire underside of the bridge's legs is in

contact with the pickup.

Also, make sure that the bridge does not slide off of the

Bridge Seat or that its legs are touching the sides of the

Bridge Seat. Doing so will result in deteriorated sound

quality.

• Ensure that the tailpiece side of the bridge stands verti-

cally. If it leans to one side, use both hands to adjust.

Make sure that each string passes over the correspond-

ing slits in the bridge.

* Playing the violin with a leaning bridge may result

in damage to the bridge or a deterioration in sound

quality.

Bad

Body

Bridge seat

Setup

Correct

Bad

Right angle

Tailpiece

[Bridge is placed vertically]

4th string

Slit

[Looking from the tailpiece]

Bridge Legs (Underside)

Pickup

[Placing the Bridge's Legs]

1st string

Bridge seat