- ページ 9
楽器 Yamaha Silent Violin SV150SのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Silent Violin SV150S 19 ページ。 Yamaha silent violin owner's manual
ページを印刷する
• The strings are tuned to the following pitches. The 1st
string is tuned to E, the 2nd string to A, the 3rd string to
D, and the 4th string to G.
Using the Tuner function on the Control Box (→ pg 11),
push in on the peg while turning to tune.
• Finally, use the adjuster to fine tune the strings.
If the adjuster is too loose, it could produce noise
Caution
while playing.
• When the instrument is not going to be used for an extended period of time, loosen the strings until the
pitch drops a whole tone.
• Before using the instrument, make sure that the bridge is positioned vertically. Damage to the bridge and
poor sound quality may result if the bridge is not properly positioned.
● Winding the Strings
(Please refer to this section when changing the strings)
1
Before you string the instrument, set the adjuster so that it is in the
middle of its adjustment range. (All adjusters)
2
Place the ball (on the end of the string) in the notch on the adjuster.
Make sure the ball is properly inserted in the adjuster's notch.
3
Insert the other end of the string into the hole on the tuning peg. Rotate the tuning peg. As shown in the
illustration, wind the string on the side away from the peg handle once around the peg, then return the
string back overlapping that wind so that the remaining slack is wound gradually toward the peg handle.
1st (E) and 2nd (A) strings are shown on the left, 3rd (D) and 4th (G) strings on the right.
3rd string (D)
Rotate the
tuning peg
as shown
4th string (G)
2nd string (A)
Rotate the
tuning peg
as shown
1st string (E)
3rd string (D)
4th string (G)
String
Adjuster's notch
Ball
Winding the 3rd
and 4th strings
Remaining
1st
winds
wind
2nd string (A)
1st string (E)
Don't loosen
too much.
The adjuster
should be set to
the middle of its
adjustment range.
Winding the 1st
and 2nd strings
1st
Remaining
wind
winds
9