- ページ 4

楽器 Yamaha TP-5026GのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha TP-5026G 12 ページ。 Pedal timpani
Yamaha TP-5026G にも: オーナーズマニュアル (12 ページ), オーナーズマニュアル (12 ページ)

Yamaha TP-5026G オーナーズマニュアル
Before Using The Pedal Timpani
Your Yamaha pedal timpani is equipped with a plastic head carefully mounted and tuned
(adjusted to a note) at the factory, and thus can be used after setup immediately. However,
new heads will tend to stretch gradually during shipping and storage, resulting in a tuning
deviation when you receive the instrument. Therefore, please perform the steps below to
restore the tuning to the factory setting prior to shipment:
1
The area between the kettle edge and the inner
circle of the counter hoop is called the collar.
Please make sure that the width of this collar is
uniform, as shown in the illustration titled "Cor-
rect".
Correct
Kettle
Counter
edge
hoop
Collar
If the collar is not uniform (illustration titled
"Wrong"), keep the heel of the pedal fully de-
pressed as shown in Fig. C, and align head and
hoop as shown in the illustration titled "Correct".
2
Make sure that the end of the wire tube is not
disengaged from the adjuster of the tuning indi-
cator as shown in Fig. A. If it is disengaged,
insert it into the adjuster as shown in Fig. B.
Fig. B
Wire tube
4
Wrong
Kettle
Counter
edge
hoop
Collar
Adjuster
Fig. A
3
If the heel of the pedal is fully lowered as in Fig.
C, proceed with step
If the pedal position is as shown in Fig. D or the
toe of the pedal is fully lowered, perform step
first.
Fig. C
Fig. D
Never put your hands etc. under the
Caution
pedal.
4
Fully depress the heel of the pedal as shown in
Fig. C. Hold the pedal in this position, as it will
return otherwise.
5
.
4