- ページ 11

楽器 Yamaha YDP-88のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha YDP-88 16 ページ。 Yamaha digital piano owner's manual

Using the Recorder

Changing the Initial Settings

RECORDER

PLAY

TRANSPOSE

tempo settings made in step 2 of the recording procedure are actually re-

corded by the YDP-88. These initial settings can be changed after the re-

cording is finished by pressing the [REC] button to engage the record ready

mode, making the required changes, and then pressing the [REC] button

again to exit from the record ready mode and register the changes. If you do

this, be careful not to press the [PLAY] button or a key on the keyboard,

either of which will start recording and erase all previous recorded data.

engage the record ready mode, and then pressing the [PLAY] button twice

without recording any data.

[PLAY] button. Playback starts from the beginning of the recorded data,

REC

and will stop automatically at the end of the recorded data. You can also

stop playback at any time by pressing the [PLAY] button.

move forward through the recording while monitoring the sound by press-

ing the [REC] button while holding the [TRANSPOSE] button.

RECORDER

PLAY

REC

The initial voice (including dual mode), damper pedal, soft pedal, and

The recorded data can be erased by first pressing the [REC] button to

To play back what you've recorded, simply press the RECORDER

• It is possible to play along on the keyboard during playback.

NOTE

• The playback volume and tempo can be adjusted by using the [MASTER

VOLUME] and [TEMPO] controls, respectively.

• If the metronome is being used during playback, the metronome will stop

when playback is stopped.

• All recorder data will be erased when the YDP-88 power is turned off.

When you want to locate a specific point in a recording you can quickly