- ページ 8

楽器 Yamaha YGRD-2500のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha YGRD-2500 13 ページ。 Concert glockenspiel

1-2

Position the pedal stay so the indentation is facing up, and insert the pedal stay all the way into

the receiver (low register side) on the leg (at this point, the wing bolt's end is aligned with the

indentation on the pedal stay), then tighten the wing bolt to secure.

Attach the pedal stay assembly to the high register side in the same manner.

* Use the hole close to the indentation as a reference for aligning the pedal stay.

Wing bolt

Receiver

(low register side)

The illustration shows attachment of the pedal

stay to the low register side.

1-3

After confirming that both right and left legs are standing vertically, attach one end of the leg

stay that is attached to the pedal stay, onto the leg (low register side) using the wing nut locat-

ed between the two upright legs, and tighten the wing nut to secure.

* Slide the end of the stay firmly onto the bolt.

Pedal stay

Indentation

End of leg stay

Wing nut

Wing bolt

Use this hole for aligning

Pedal stay

Indentation

Leg

(low register side)

Leg

(low register side)

Leg stay

Assembly