- ページ 10

楽器 Yamaha YM-5100AのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha YM-5100A 16 ページ。 Concert marimbas
Yamaha YM-5100A にも：オーナーズマニュアル (14 ページ), オーナーズマニュアル (12 ページ)

ページを印刷する

ASSEMBLY

Insert the rails (2) and (3) into the end frames of the legs.

2-1. First, insert the rail (2).

A mark "B" is printed on the big end face of the rail (2) and the groove section of the end frame of

the big end leg.

* Do not insert one side of the rail all the way down first, but push both sides into grooves alternately little

by little until both sides are inserted fully and stop.

Next, in the same way, insert the rail (3) securely.

A mark "C" is printed on the big end face of the rail (3) and the groove section of the end frame of

the big end leg.

"B" mark on the rail

and end frame.

Large end

2-2. Engage the short rail clamp located at the center of the rail (3) with the rail (2).

* Release the clamp from its holder, lift and move it to the rail (2) and push it down fully.

"C" mark on the rail

and end frame.

Rail (2)

Rail clamp

Rail (3)

Rail clamp

Rail (2)

Small end