- ページ 35

電子キーボード Yamaha Arius YDP-140のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Arius YDP-140 44 ページ。 Yamaha digital piano user's manual
Yamaha Arius YDP-140 にも：ミディ・データ・フォーマット (6 ページ), クイック・オペレーション・マニュアル (2 ページ), オーナーズマニュアル (44 ページ), マニュアル (44 ページ), (デンマーク語）ユーザーガイド (44 ページ)

Keyboard Stand Assembly

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accor-

dance with the sequence given below.

• Assembly should be carried out by at least two persons.

• Assemble the stand on the ﬂat ﬂoor surface.

• Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of

incorrect screws can cause damage or malfunction of the product.

• Be sure to tighten up all screws upon completing assembly of each unit.

• To disassemble, reverse the assembly sequence given below.

Have a Phillips-head (+) screwdriver ready

Remove all parts from the package and make sure you

have all of the items.

Bundled pedal cord

inside

Assembly Parts

6 × 20 mm long screws × 4 1

6 × 16 mm short screws ×4 2

4 × 12 mm thin screws ×2 3

Headphone hanger set (YDP-160 only)

4 × 10 mm thin screws ×2 5

AC Power cord (YDP-160)

AC Power adaptor (YDP-140)

4 × 20 mm tapping screws × 4 4

Cord holders × 2

Headphone hanger

Attach (ﬁnger-tighten) C to D

and E.

1-1 Untie and straighten out the bundled pedal

cord. Don't discard the vinyl tie. You will

need it later in step 6.

1-2 Align D and E with each end of C.

1-3 Attach D and E to C by ﬁnger-tightening the

long screws 1 (6 × 20mm).

1-2

1-3

YDP-160/140

Keyboard Stand Assembly

1-1

Owner's Manual