- ページ 39
電子キーボード Yamaha AVANTGRAND N2のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha AVANTGRAND N2 49 ページ。 Yamaha electronic keyboard user manual
Yamaha AVANTGRAND N2 にも： オーナーズマニュアル (49 ページ)
ページを印刷する
Appendix
Message
Indicates failure in accessing the USB flash memory or media.
→ Disconnect the USB flash memory device or media and connect it again to the USB [TO DEVICE] terminal. If
0
0
1
0
0
2
Indicates that the song data cannot be loaded correctly.
0
0
4
Indicates that the song data is too large to be loaded.
The USB flash memory device or media has not been formatted.
→ Format the USB flash memory device or media after making sure on your computer that the USB flash memory
0
0
5
0
0
6
Indicates that the protected song data cannot be loaded.
0
0
7
There is no song data.
The USB flash memory device or media is not connected.
0
0
8
→ Connect a USB flash memory device or media to the USB [TO DEVICE] terminal.
Indicates failure in saving the file, because the same name folder exists in the USB flash memory device or media.
0
1
4
→ Change the folder name using your computer.
This USB device cannot be used.
0
2
0
→ Use only USB flash memory devices compatible with the instrument.
Displayed when the total amount of USB flash memory or USB hub has become too large.
0
2
2
→ Refer to "Using USB Storage Devices" on page 30.
Indicates failure in connecting the USB flash memory or media.
0
2
3
→ Disconnect the USB flash memory device or media and connect it again.
Communication with the USB device has been shut down because of the overcurrent to the USB device.
0
2
4
→ Disconnect the device from the USB [TO DEVICE] terminal, then turn on the power of the instrument.
-
-
-
Processing the current operation.
C
L
r
Initializing to the normal settings.
E
5
3
Indicates failure in setting the keyboard.
→ Please contact your nearest Yamaha dealer or authorized distributor.
E
5
4
E
n
d
Displayed when the current operation is completed.
Displayed when internal memory is full.
F
U
L
Displayed when the total amount of files or folders has become too large.
Displayed when the media is full.
F
o
r
Indicates that the instrument has engaged format mode for the USB storage device.
n
Y
Prompts you to confirm or cancel the formatting operation.
P
r
o
Indicates that the USB storage device or media is write-protected.
* When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes.
* Press the [+] or [-] button to exit from these message displays.
Message List
this message appears repeatedly, use another USB flash memory device or media.
or media you are formatting does not contain important data (page 33).
Comment
N3/N2
39
•
Owner's Manual