- ページ 9

電子キーボード Yamaha KX88のPDF 正規製品マニュアルをオンラインで閲覧またはダウンロードできます。Yamaha KX88 38 ページ。 Midi master keyboard
Yamaha KX88 にも：オーナーズマニュアル (38 ページ), オーナーズマニュアル (38 ページ), サービスマニュアル (17 ページ)

ページを印刷する

THREE MODES

The KX88 has three basic modes, and the selector switches

have different functions in these different modes. Change

modes by pressing the MODE switch. Pressing the MODE

switch will take you back and forth between PLAY and

CA modes. If you hold the MODE switch down for about 1

second while in CA mode, you will enter PA mode. Pressing

MODE again will return you to PLAY mode.

PLAY MODE

This is the mode in which you will normally play the KX88.

One of the 3 play mode indicators will be on, and the 2

readouts will show the voice program for MIDI banks A

and B.

The KX88 sends MIDI signals on two independent banks.

(As set up at the factory, these will be MIDI channels 1 and

2.) Notice that the PLAY mode LED is indicating DUAL.

This means that the whole keyboard is sending the same

MIDI signals on both MIDI banks A and B.

SELECTING VOICE PROGRAMS

In PLAY mode, the two readouts will show the voice num-

bers for each MIDI bank. Select voices using the Bank

switch and program select switches 1-16. To select voices

17-32, press the Bank switch. The Bank LED will light, and

switches 1-16 will now select voices 17-32. To go back to

1-16, press the Bank switch again. In this way, you can

select voices independently for MlDI banks A and B.

NOTE: The Yamaha DX7 and TX816 voice program mem-

ories are 1-32. However, some MIDI synthesizers

and tone generator units may have up to 128 voice

program memories. The KX88 may be set to 8

BANK mode to select voice programs 1-128. See

p. 20.

ASSIGNABLE CONTROLLERS

Each of the KX88's controllers (Wheels 1 and 2, Breath

Controller, After Touch, 4 Continuous Sliders, 5 Momen-

tary Switches, 2 Toggle Switches, 2 Foot Controllers and

2 Foot Switches) may be assigned to perform any function

you want in PLAY mode. For example, you may have a

foot controller controlling pitch-bend, and a footswitch

switching between mono/poly, or switching MIDI channels.

Also, these functions may be assigned to affect MIDI banks

A and/or B. Your imagination is the only limit.

FACTORY PRESET CONTROLLER ASSIGNMENTS

For now, however, let's learn to use the functions that were

assigned to the various controllers at the factory. (For a

complete list of how the KX88 is preset, see page 6.)

- 7 -