- ページ 4
電子キーボード Yamaha Tyros4のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Tyros4 17 ページ。 Internet connection guide (version 1.10)
Yamaha Tyros4 にも： 接続マニュアル (22 ページ)
ページを印刷する
Installing / Updating the USB-MIDI Driver
1 Disconnect all USB devices from the computer except for
the mouse and computer keyboard.
2 Start the computer and use the "Administrator" account
to log on to Windows.
Close all applications and windows that are open.
3 Insert the Accessory CD-ROM into your computer's CD-
ROM drive.
4 Turn off the power of the instrument.
5 Connect the USB connector of the computer to the USB
TO HOST terminal of the MIDI instrument with a
standard USB cable.
n
Do not use a USB hub for connecting multiple USB devices.
n
If you are using several MIDI instruments with USB connection at
the same time, connect all the instruments to the computer and
turn on the power for all of them, then perform the following
installation procedure.
6 Turn on the power of the instrument(s).
7 When the "Found New Hardware Wizard" window
appears, click [Cancel].
n
On some computers, it may take a few minutes before this screen
appears.
n
This screen will not appear on Windows 7. When the message
"Device driver software was not successfully installed." appears,
continue the installation procedure.
n
This screen will not appear if you are updating the USB-MIDI
driver from the previous version. Continue the installation
procedure.
8 Open the following folder from the CD-ROM drive in your
"My Computer" folder, and double click "setup.exe."
n
• For users of 32 bit version Windows XP/Vista/7: "USBdrv32_"
• For users of 64 bit version Windows 7: "USBdrv64_"
* Select [Start] menu → [Control Panel] → [System] to check the
system.
9 When the "File Download" window appears, click [Run]
or [Open].
The "Preparing to install" window appears. The next window will
appear after finishing this preparation.
n
The messages that appear in this window may differ somewhat
depending on your browser.
n
(Windows XP) If the "Security Warning" window appears, click
[Run].
n
(Windows Vista/7) If the "User Account Control" window
appears, click [Continue] or [Yes].
) When the "Welcome to the InstallShield Wizard for
Yamaha USB-MIDI Driver" window appears, click
[Next].
If the warning message below appears during the installation,
click [Yes], [Continue Anyway], or [Install].
4
Tyros4 Accessory CD-ROM Installation Guide
Windows XP
Windows Vista/7
! When a message appears indicating that the driver has
been successfully installed, click [Finish].
n
On some computers, it may take a few minutes before this screen
appears.
@ When a window appears prompting you to restart the
computer, do so.
Restart the computer by following the on-screen directions.
n
This display will not appear when using Windows Vista/7. No
restart is necessary.
Checking the version of the driver
Open the "Control Panel" and double-click the "Yamaha
USB-MIDI Driver" icon. A window appears and the driver
version is indicated in the lower left of the window.
Voice Editor
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Once you've install the Voice Editor, you can use your computer
to edit the Voices of the Tyros4.
1 Double-click on the "VoiceEditor_" folder in the CD-
ROM.
The file "Setup.exe" will be displayed.
2 Double-click on the "Setup.exe" file.
The setup dialog will be displayed.
3 Execute the installation by following the on-screen
directions.
For subsequent operations, refer to the PDF owner's manual for
the Voice Editor.