- ページ 21

レシーバー Yamaha HTR-5130のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha HTR-5130 42 ページ。 Natural sound av receiver

Adjust the sound output levels of the center speaker

and the rear speakers so that they sound as similar as

possible to the level of the main speakers.

Make the adjustment of each speaker output level at your

listening position with the remote control transmitter.

Press once or more so that "CENTER" or "REAR"

appears on the display.

* Select "CENTER" to adjust the output level of the

center speaker, and select "REAR" to adjust the

output level of the rear speakers.

DELAY/CENTER

/REAR/SWFR

Adjust the level.

* Pressing the + side raises the level and the – side

lowers the level.

TIME/

–

LEVEL

Cancel the test tone.

TEST

Notes

Once you have completed these adjustments, you can

adjust the overall sound level of your audio system by using

the VOLUME control (or the VOLUME keys on the remote

control transmitter) only.

If you use external power amplifiers, you may also use their

volume controls to achieve proper balance.

In step 9, if the center channel mode is in the "PHANTOM"

position, the sound output level of the center speaker cannot

be adjusted, because the center sound is automatically

output from the left and right main speakers.

Disappears.

MAIN LEVEL switch

HTR-5130RDS only

If the main speakers are distinctly louder than the rear

speakers even after making balance adjustments, it is

possible to decrease the output level of the MAIN SPEAKERS

terminals by 10 dB by setting this switch to "–10 dB".

Otherwise, keep this switch set to "0 dB".

MAIN

LEVEL

-10dB 0dB