- ページ 14

レシーバー Yamaha HTR-5920のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha HTR-5920 45 ページ。 Digital home theater system av receiver
Yamaha HTR-5920 にも：サービスマニュアル (38 ページ)

ページを印刷する

CONNECTIONS

Placing speakers

The speaker layout below shows the standard ITU-R

speaker setting. You can use it to enjoy surround sounds.

ITU-R is the radio communication sector of the ITU

(International Telecommunication Union).

80˚

CONNECTIONS

30˚

60˚

1.8 m (6 ft)

Front speakers (FR and FL)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers an equal distance from

the ideal listening position. The distance of each speaker

from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system. Align the front

face of the center speaker with the front face of your video

monitor. Place the speaker centrally between the front

speakers and as close to the monitor as possible, such as

directly over or under it.

Surround speakers (SR and SL)

The surround speakers are used for effect and surround

sounds. Place these speakers behind your listening

position, facing slightly inwards, about 1.8 m (6 ft) above

the floor.

Subwoofer

The use of a subwoofer is effective not only for

reinforcing bass frequencies from any or all channels, but

also for high fidelity reproduction of the LFE (low-

frequency effect) channel included in Dolby Digital and

DTS software. The position of the subwoofer is not so

critical, because low bass sounds are not highly

directional. But it is better to place the subwoofer near the

front speakers. Turn it slightly toward the center of the

room to reduce wall reflections.