- ページ 11

レシーバー Yamaha MCX-2000AのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Yamaha MCX-2000A 13 ページ。 Digital audio receiver

Conﬁguring a MusicCAST-only Network

The simplest and easiest way is to network the MCX-2000 and its clients in a wireless conﬁguration. In a wireless MusicCAST net-

work, the MCX-2000 can stream music to up to ﬁve clients within a range of thirty meters from the server. This is ideal for most

houses, since the MusicCAST network can extend to any room without using a single network cable. With the wireless setup, you

don't need to place the MCX-2000 and clients on the same ﬂoor. However, if there is an obstacle that blocks radio signals between

the MCX-2000 and clients, music streaming may fail even though the devices are theoretically placed closely enough.

If you are planning to use the MusicCAST systems in a multi-ﬂoor shop (for example, in building larger than a family house), you may

want to connect more clients using network cables. In addition to the ﬁve wireless clients, the MCX-2000 can support up to ten wired

clients at the same time. The server can stream a different song or playlist to each client, or broadcast the same music to several cli-

ents. You can use these functions to create different moods in different rooms by streaming separate music to clients on each ﬂoor, all

the while broadcasting the same music to maintain a uniﬁed image for the shop. You can even use the timer playback feature to

stream the same audio message to all clients at the speciﬁed time while they normally play different music.

These two MusicCAST networks are easily conﬁgured using the Setup Wizard.

The most important thing in conﬁguring a MusicCAST-only network is to enable the MCX-2000's built-in DHCP server feature. The Setup

Wizard automatically enables the feature if you specify "MusicCAST-only" for your network. However, there is another situation in which you

still need to use an external DHCP server for your MusicCAST-only network. If you create a large MusicCAST network using multiple MCX-

2000 servers, you must set up each MCX-2000 to act as a unique server. (This is because each MCX-2000's factory settings are identical

and duplicate settings in the same network are not allowed.) To make this process easier, you may need an external DHCP server. For

more information, see the section "Manual Conﬁguration of a MusicCAST Network".

MCX-A10

MCX-2000

MCX-A10

Wirreless

MCX-2000

Wired

Wirreless

Control Room

MCX-2000 Owner's Manual