- ページ 3

ラック＆スタンド DirectConnect 19930のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DirectConnect 19930 4 ページ。 Professional series racks complete rack with casters, power strip, thermal control and dual fans

ページを印刷する

2.0 F

EATURES

This high-performance DirectConnect

benefits and features that enable it to perform in a superior manner. Among those

benefits and features you will find:

Quick and easy to assemble design allows for flat shipment

1U Digital Thermal Controller

(LCD display menu)

1U 6 outlet Power Distribution Strip with protected on/off switch and long ground power cord

Adjustable numbered 2.5mm

(11gauge)

mounting rails to fit virtually any piece of 19" equipment.

Robust locking

six screw heavy duty caster system

(2)

Four adjustable

(one in each corner of base)

Removable Cable Knockouts on rack's top and bottom

Heavy-gauge steel tops & bottoms, seamless steel sides, and rails

Locking, removable, & reversible custom designed tempered glass front door

Locking, removable, & reversible vented rear door

Heavy duty and durable black textured powder coat finish

Cable channel molding option between rails and doors for 2" x 2" PVC" cable management

19" equipment width rail size for the 29U, 38U, and 42U racks

29U Rack Dimensions:

57.5" x 23.75" x 23.75"

(H x W x D)

38U Rack Dimensions:

70.86" x 23.75" x 23.75"

(H x W x D)

42U Rack Dimensions:

78.75" x 23.75" x 23.75"

(H x W x D)

3.0 P

ACKAGE

ONTENTS

Before attempting to use these DirectConnect

packaging and make sure the following items are contained in the shipping carton:



Front, back, and two (2) side assemblies



Two (2) left and two (2) right mounting rails

1U digital thermal controller



1U 6 outlet power distribution strip



Adjustable locking feet – four (4)

DirectConnect

User's Manual



42 - M5x10mm bolts

for assembly



38 – 10-32 bolts

for mounting rails

Note: Please retain the original packing material in case you need to return the unit. If you

find any items missing, contact DirectConnect

the model number, serial number, and invoice available for reference when you call.

MPORTANT: For optimum performance and safety, please read these instructions carefully before

assembling, operating, or adjusting this product. Please keep this manual for future reference. If you

don't understand correct installation instructions, please consult your regular installation specialist

*DirectConnect

Professional Series Racks have many

and top loaded dual 5" Cooling Fans

heavy duty threaded

and square knockout

(2)

heavy duty locking feet

(1,460.5 x 603.3 x 603.3mm)

(1,860.5 x 603.3 x 603.3mm)

(2,057.4 x 603.3 x 603.3mm)

Professional Series Racks, please check the

(Total of 3 cartons)

Top assembly with dual fans

Base assembly

Four (4) base cable plates

Power cord for PDU strip

Four (4) locking casters

Keys –two (2) sets of two (2)

42 - M6x12mm bolts

for assembly

immediately (800.531.3224). Please have

is a registered trademark.

4 / 8

These DirectConnect

AUTION

the maximum weights indicated. See apparatus instructions. Use with products heavier

than the maximum weights indicated may result in instability, causing possible injury.

Step 1: Unpacking Carton 2 of 3,

(2)

Installing Left

and Right

(A)

square knockout mounting rails on Left and Right Side Assembly

Using M6x12 screws

(G)

left

and right

mounting rails as shown in Figure 1.

(A)

(B)

Step 2: Unpacking Carton 1 of 3

Using eight

M6x12 screws

(8)

1 of 3 and attach to the Left

Installing the Back Assembly (2) to Left (3), Right (3), & Front (1) Assemblies

Fig.2

4.0 I

NSTALLATION

UIDE

We are not responsible for any personal injury or product

damage due to mishandling, incorrect mounting,

incorrect assembly, or incorrect use of this product

Professional Series Racks are intended only with

removing transit parts, and side assemblies.

(Two

Side Assemblies, Left

(2)

Remove the small mini shipping screws

opposite of side door releases on both the

left & right side of side rack assembly

remove side panels to start rack assembly.

threaded mounting rails or Left

(B)

and M6 snap nuts

(I)

(six (6) per rail)

and assembly Front & Rear Assembly to sides.

attach the Front Assembly

as unpacked from carton

(G)

(1)

and Right

assemblies as shown in Figure 2.

(A or J)

(B or K)

Using eight

M6x12

(8)

screws (G) attach the

Back Assembly (2)

as unpacked from

carton 1 of 3 and

attach to the left and

right assemblies (3)

as shown in Figure 3.

: Do not

MPORTANT

force the bolt into

the hole, which may

damage equipment

and injure of person.

5/ 8

& Right

Mounting Rails)

(2)

(3)

and Right

(J)

(K)

attach the

Fig.3