- ページ 4

ラック＆スタンド DirectConnect DCBAR29UのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DirectConnect DCBAR29U 4 ページ。 Professional series racks bar rack

ページを印刷する

2.0 FEATURES

The high-performance DirectConnect® Professional Series Racks have many benefits

and features that enable it to perform in a superior manner. Among those benefits and

features you will find:

Quick and easy to assemble design allows for flat shipment

Adjustable numbered (EIA standards) mounting rails to fit virtually any piece of

19" equipment

Robust locking (2) six screw heavy duty caster system

Four adjustable (one in each of the four (4) corners of the base) heavy duty lock-

ing feet

Removable Cable Knockouts on rack's top and bottom

Heavy-gauge steel tops and bottoms, seamless steel sides, and rails

Load capacity 29U–up to 650 lbs (295Kg) / 38U–up to 700 lbs (318Kg) / 42U–up to

780 lbs (354Kg)

Locking, removable, and reversible custom designed vented tempered glass front

door

Locking, removable, and reversible fully vented rear door

Heavy duty and durable black textured powder coat finish

Cable channel molding option between rails and doors for 2" x 2" PVC" cable

management

19" equipment width rail size (EIA standard labeling) for the 29U, 38U, and 42U

racks

29U Rack Dimensions: (H x W x D) 57.5" x 23.75" x 23.75" (1,460.5 x 603.3 x

603.3mm)

38U Rack Dimensions: (H x W x D) 73.25" x 23.75" x 23.75" (1,860.5 x 603.3 x

603.3mm)

42U Rack Dimensions: (H x W x D) 73.25" x 23.75" x 23.75" (2,057.4 x 603.3 x

3.0 PACKAGE CONTENTS

Before attempting to use these DirectConnect® Professional Series Racks, please check

the packaging and make sure the following items are contained in the shipping carton:

(Total of 3 cartons)

Front, back, and two (2) side assemblies

Top and bottom assembly

Two (2) left and two (2) right sides with mounting rails

Adjustable locking feet – four (4)

Four (4) locking casters

DirectConnect® User's Manual

Keys –two (2) sets of two (2)

Hardware pack

4.0 INSTALLATION GUIDE

We are not responsible for any personal injury or product damage due to mishan-

dling, incorrect mounting, incorrect assembly, or incorrect use of this product.

CAUTION: DirectConnect® Professional Series Racks are intended only with the maxi-

mum weights indicated. See apparatus instructions. Use with products heavier than

the maximum weights indicated may result in instability, causing possible injury.

Step 1:

Unpacking Carton 2 of 3, removing transit parts, and side assemblies

(Two (2) Side Assemblies, (with mounting rails attached)

Remove the small mini shipping screws (2) opposite of side door releases on both the

left and right side of side rack assembly (3) to remove side panels to start rack assem-

bly.

Step 2:

Unpacking Carton 1 of 3 and assembly Front & Rear Assembly to sides.

Using eight (8) M5x10 screws (C) attach the Front Assembly (1) as unpacked from

carton 1 of 3 and attach to the Left (A) and Right (B) assemblies as shown in Fig-

ure 2. (Casters are already attached)

Installing the Back Assembly (2) to Left (3), Right (3), & Front (1) Assemblies

Using eight (8) M5x10 screws (C) attach the Back Assembly (2) as unpacked from

carton 1 of 3 and attach to the left and right assemblies (3) as shown in Figure 3.

(Casters are already attached)

Fig. 2

Fig. 3