- ページ 4

レシーバー Yamaha YHT-893のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha YHT-893 8 ページ。 Home cinema speaker package
Yamaha YHT-893 にも：オーナーズマニュアル (11 ページ), オーナーズマニュアル (8 ページ)

ページを印刷する

Wall mounting the surround speakers

When mounting the speakers on a wall, attach one of the spacing pads provided near each of the corners on

the rear surface of the speaker to prevent the speaker cable from being caught between the wall and the

speaker.

5-7/8"

(150mm)

When using speaker brackets to mount the speakers

on a wall or celling, it is strongly recommended that

safety wire, which may be included with the bracket, be

used between the speaker and the bracket to prevent

the speaker from falling.

Fasten screws into a firm wall or wall support as shown in the figure, and hang the holes of the mounting

bracket on the protruding screws.

Make sure that the screws are securely caught by the narrow sections of the "key hole" opening.

WARNING

Each speaker weighs 2.6 lbs (1.2 kg). Do not mount the speakers on thin plywood or a wall with soft surface

material, since the screws may pull away from the surface and fall. This will damage the speakers and can

cause personal injury.

Do not mount the speakers on a wall with nails, adhesives, or any other unstable hardware. Long-term use

and vibrations may cause them to fall.

To avoid accidents resulting from tripping over loose speaker cords, they should be affixed to the wall or floor

molding.

Secure installation is the purchaser's responsibility.

SETTING UP THE SPEAKERS

Wall / wall support

Min

7/8"

7/32"

Tapping screw

(Available at the hardware store)