- ページ 19

アンプ Yamaha A-S2100のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha A-S2100 42 ページ。 Integrated amplifier
Yamaha A-S2100 にも：オーナーズマニュアル (33 ページ)

•

Bi-wire connection

The hi-wire connection separates the woofer from the

combined midrange and tweeter section. A hi-wire

compatible speaker has four binding post terminals. These

two sets of terminals allow the speaker to be split into two

independent sections. This split connects the mid and high

frequency drivers to one set of terminals and the low

frequency driver to the other pair.

Example of a bi-wiring connection (R channel)

Rear panel of A-S2100

Speaker

Caution

To use the hi-wire connections, ~e impedance of each speaker

must be 8

higher.

Remove the shorting bars or bridges to separate the LPF (low

pass filter) and HPF (high pass filter) crossovers.

,,,

~<i>:O

To use the hi-wire connections, switch the SPEAKERS selector

on the front panel to the A+B BI-WIRING position.

•

Connecting the power cable

Plug the power cable into the AC IN inlet when all

connections are complete, and then plug in the power

cable to the AC outlet.

Rear panel of A-S21 00

ACIN

[OJ

Supplied power cable

to an AC outlet

19En