- ページ 14

アンプ Yamaha AV-90PYのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha AV-90PY 25 ページ。 Natural sound digital sound field processing amplifier 5 speaker configuration

ページを印刷する

To record a source to tape

Select the source to be recorded.

* To dub from tape to tape, refer to the "Notes" shown

below.

* When selecting LD/TV, TUNER, CD or PHONO, be sure

the TAPE 1 MON, VCR 1 MON or VCR 2/TAPE 2 MON

input selector(s) are not also selected.

Play the source and then turn the VOLUME control

up to confirm the input source.

Set the tape deck or VCR in the recording mode.

1,4

To monitor the audio and/or video signals being

recorded, press the input selector button for the audio

or video tape recorder being used to make the

recording.

* A red selector switch indicator takes priority over an

orange indicator.

Notes

There are three ways to dub from tape to tape:

1) To record from VCR 2 or tapedeck 2 to VCR 1, press

both the VCR 2 MON/TAPE 2 MON and VCR 1 MON

selector switches (so both the indicators are lighted red).

2) To record from VCR 2 or tapedeck 2 to tapedeck 1, press

both the VCR 2 MON/TAPE 2 MON and TAPE 1 MON

selector switches (so both the indicators are lighted red).

3) To record from VCR 1 to tapedeck 1, press both the VCR

1 MON and TAPE 1 MON selector switches (so both the

indicators are lighted red).

DSP, VOLUME, BASS, TREBLE and BALANCE contol

settings have no effect on the material being recorded.