- ページ 4

アンプ Yamaha AX-9のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha AX-9 15 ページ。 Yamaha natural sound stereo integrated amplifier owner's manual

ページを印刷する

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

Install this unit in a cool, dry, clean place – away from windows,

heat sources, sources of excessive vibration, dust, moisture and

cold. Avoid sources of humming (transformers, motors). To

prevent fire or electrical shock, do not expose the unit to rain or

water.

Never open the cabinet. If something drops into the set, contact

your dealer.

Do not use force on switches, controls or connection wires. When

moving the unit, first disconnect the power plug and the wires

connected to other equipment. Never pull the wires themselves.

The openings on the cabinet assure proper ventilation of the unit.

If these openings are obstructed, the temperature inside the

cabinet will rise rapidly and eventually damage the circuits.

Therefore, avoid placing objects against these openings and do

not install the unit where the flow of air through the ventilation

openings could be impeded.

Always set the VOLUME control to "0" before starting the audio

source play: increase the volume gradually to an appropriate level

after the play has been started.

Do not attempt to clean the unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

Be sure to read the "TROUBLESHOOTING" section regarding

common operating errors before concluding that the unit is faulty.

When not planning to use this unit for long periods of time

(ie., vacation, etc.), disconnect the AC power plug from the

wall outlet.

10.

To prevent lightning damage, disconnect the AC power plug and

disconnect the antenna cable when there is an electrical storm.

11.

Grounding or polarization – Precautions should be taken so that

the grounding or polarization of an appliance is not defeated.

12.

AC outlet

Do not connect audio equipment to the AC outlet on the rear panel

if that equipment requires more power than the outlet is rated to

provide.

13.

Voltage Selector (General Model only)

The voltage selector on the rear panel of this unit must be set

for your local main voltage BEFORE plugging into the AC

main supply.

Voltages are 110/120/220/240V AC, 50/60 Hz.

IMPORTANT

Please record the serial number of this unit in the space below.

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner's Manual in a safe place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous if

engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

The wire in the mains lead are coloured in accordance with

the following code:

Blue: NEUTRAL

Brown: LIVE

The colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying

the terminals in your plug. Proceed as follows: the wire

which is coloured BLUE must be connected to the terminal

which is marked with the letter N or coloured BLACK. The

wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

This unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit

itself is turned off.

In this state, this unit is designed to consume a very small

quantity of power.

WARNING

Do not change the IMPEDANCE SELECTOR switch

setting while the power to this unit is on, otherwise this

unit may be damaged.

IF THIS UNIT FAILS TO TURN ON WHEN THE

STANDBY/ON SWITCH IS PRESSED

The IMPEDANCE SELECTOR switch may not be set to

either end closely. If so, set the switch to either end closely.

IMPEDANCE SELECTOR

SET BEFORE POWER ON

A OR B:4 MIN./SPEAKER

A OR B:8 MIN./SPEAKER

A + B:8 MIN./SPEAKER

A + B:l6 MIN./SPEAKER

SPEAKERS

VOLTAGE SELECTOR

AC OUTLETS

SWITCHED

l00W MAX. TOTAL

(General model)