- ページ 22

アンプ Yamaha XMV4280のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha XMV4280 39 ページ。 Power amplifier
Yamaha XMV4280 にも：オーナーズマニュアル (38 ページ), オーナーズマニュアル (42 ページ), オーナーズマニュアル (43 ページ)

Initializing the Internal Memory

Execute the following procedure when you want to return the internal memory settings to their factory-

set state, such as when the amplifier has been moved to a different location.

To initialize the internal memory, power-off the XMV; then set device setup DIP switch 7 to the down-

ward position and switch 8 to the upward position, and power-on the XMV.

During initialization, the [NETWORK], [YDIF], and [PANEL LOCK] indicators will blink. When ini-

tialization is complete, the [NETWORK] and [YDIF] indicators will blink. Turn off the power; then set

device setup DIP switches 7 and 8 to the upward position (RESUME), and power-on the XMV.

The following memory is initialized.

• Attenuator values

• Polarity settings

• HPF settings

• Analog/digital input setting

• [SIGNAL] indicator display setting

• Event log

* When the unit is shipped from the factory, the device setup DIP switches are all in the upward position.

XMV4280/XMV4140

Owner's Manual