- ページ 7

スピーカーシステム Yamaha ATS-1010BLのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha ATS-1010BL 20 ページ。 Front surround system

ページを印刷する

Installation: illustrated examples

Example 1

Example 2

Example 1: Unit beneath TV

Example 2: Unit without stand beneath TV (☞ P. 9)

Example 3: Wall mounting

Notes

• Do not place the unit on/under any other components such

as BD player in a pile. The vibration of the unit may cause

system failure, etc. in other components.

• Depending on your installation environment, connections

to external components such as TV or BD player can be

done before installing the unit. We recommend that you

temporarily place and arrange all components in order to

decide which procedure is best done first.

• When you clean the unit, use a clean, dry and soft cloth

(such as cloth for glasses).

• Do not touch the grille on the front and bottom of the unit.

• Place the unit away from your TV more than 50 mm (2")

so as not to damage your TV with rear panel of the unit.

The brackets on the rear of the unit are removable.

Attaching the unit to a wall

You can attach the unit to a wall using the brackets on the

rear of the unit.

When installing the unit on a wall, all

installation work must be performed by a

qualified contractor or dealer. The customer

must never attempt to perform this installation

work. Improper or inadequate installation

could cause the unit to fall, resulting in

personal injury.

Placing

Attach the supplied mounting template

on a wall and mark the holes of the

Example 3

mounting template.

Tapes or

thumbtacks

Remove the mounting template and then

install the commercially available screws

and the supplied spacers at the marks.

Spacer (5 mm (1/4"))

7 to 9 mm

(1/4" to 3/8")

Hang the unit on the screws using the

brackets on the rear of the unit.

Notes

• Do not attach the unit to a wall that is made of weak

materials such as plaster or veneered woods. Doing so may

cause the unit to fall.

• Use commercially available screws that can support the

weight of the installation.

• Make sure you use specified screws to attach the unit. Using

clamps other than specified screws, such as short screws,

nails, or two-sided tape, may cause the unit to fall.

• When connecting the unit, fix the cables in place where they

will not become loose. If your foot or hand accidentally gets

caught on a loose cable, the unit may fall.

• After attaching the unit, check that the unit is fixed

securely. Yamaha will bear no responsibility for any

accidents caused by improper installations.

Mark

4 mm (#8)

Minimum

2 to 4 mm

20 mm (3/4")

(1/16" to 3/16")