- ページ 16
自動車アクセサリー Directechs DB3のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Directechs DB3 19 ページ。 2011 subaru outback - 403.subaru2 1.25
Directechs DB3 にも： インストレーション・マニュアル (20 ページ), インストレーション・マニュアル (19 ページ), インストレーション・マニュアル (20 ページ), インストレーション・マニュアル (10 ページ), 取扱説明書 (17 ページ)
ページを印刷する
Feature and option list
It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing
page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the
information on this page.
* Default option
Feat.
Operation
Flashes / Option
1. No RF Output* Module is connected to a remote starter using a standard installation.
1
RFTD Output
2. RFTD Output
Type
3. SmartStart
2
Unlock Driver
1. Driver priority*
Priority
2. All
1. Trunk*
3
Trunk
2. Tail Glass
Opening/Electric
Rear Hatch
1. Trunk
4
Aux1
2. Tail Glass
Opening/Electric
Rear Hatch*
1. Disabled*
5
Heated Seats
2. Enabled
6
Heated
1. 32 °F (0 °C)*
Seats/Defroster
Temperature
2. 23 °F (-5 °C)
Control
3. 41 °F (5 °C)
4. Always ON
1. High*
7
Heated Seats
2. Med
Temperature
Level
3. Low
8
Smart OEM
1. Disabled
Alarm Control
2. Safelock
16
403.GM11 1.20 2014 Buick Enclave
©2021 VOXX•DEI LLC. All rights reserved.
Description
Module is connected to an XL202 using an RSR or RXT installation (when available).
Module is connected to SmartStart using an RSR or RXT installation (when available).
Unlocks only the driver door when the button is first pressed, and unlocks all doors
when it is pressed a second time within 5 seconds.
Unlocks all doors when the button is first pressed.
Will pop the trunk if available.
Trunk/Tail Glass: Will pop the trunk or if not available, will pop the tail glass.
Electric Rear Hatch: When available, will operate the rear hatch.
Will pop the trunk if available.
Trunk/Tail Glass: Will pop the trunk or if not available, will pop the tail glass.
Electric Rear Hatch: When available, will operate the rear hatch.
No operation.
When the feature is enabled, it will activate the Heated Seats and heated steering
wheel.
When Heated Seats or Defroster feature is enabled, it will activate the feature upon
remote start when temperature is below 32 °F (0 °C).
When Heated Seats or Defroster feature is enabled, it will activate the feature upon
remote start when temperature is below 23 °F (-5 °C).
When Heated Seats or Defroster feature is enabled, it will activate the feature upon
remote start when temperature is below 41 °F (5 °C).
When Heated Seats or Defroster feature is enabled, it will activate the feature at
any temperature.
When Heated Seats are activated, they will be set to HIGH.
When Heated Seats are activated, they will be set to MEDIUM.
When Heated Seats are activated, they will be set to LOW.
The OEM alarm will not be controlled by the interface upon remote start. No disarm
or arm command will be executed at the beginning or end of the sequence; it must
be controlled by the Remote Starter.
Smart OEM Alarm Control will behave like a standard Safelock feature on a remote
starter. It will unlock at the beginning of the sequence, and relock after start and
shutdown.