- ページ 9

自動車アクセサリー Directechs DIRECTED DB3 403.FORD18のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Directechs DIRECTED DB3 403.FORD18 20 ページ。

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

For

Convenience-Only

programming, see next section.

Ensure vehicle is in a safe location and cannot move forward during programming.

The harnesses must be connected in this exact order:

1. Connect the 14-pin.

2. Connect the 12-pin.

3. Connect the 10-pin.

When the LED turns ON solid red, proceed with the next step.

Press the Push-to-Start (PTS) button once (1) to turn the ignition ON.

If Tan & Tan/Black CAN wires are connected, the LED will flash orange then turn solid

green for 3 seconds then turn OFF.

If the Tan & Tan/Black CAN wires are not connected, the LED will flash orange up to 15

seconds, then flash green, orange, green and then turn off.

Press the PTS button once (1) more to turn the ignition OFF.

You have successfully completed the module programming sequence.

403.FORD18 1.06 2021 Lincoln Nautilus (Smart Key)