- ページ 13

スピーカーシステム Yamaha YST-SW005のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha YST-SW005 20 ページ。 Yamaha subwoofer system owner's manual
Yamaha YST-SW005 にも：オーナーズマニュアル (19 ページ), サービスマニュアル (16 ページ), サービスマニュアル (13 ページ)

ページを印刷する

How to connect speaker cables to the input and output terminals

of the speakers

For connections, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the

connections are faulty, no sound will be heard from the speakers.

Main/center/rear speakers

Rear center speaker (for NS-P236)

One side of the provided speaker cable has a white broken

line and the other side has no line.

Connect the (+) terminals on both the speaker and the

amplifier using the side with a white broken line. Connect

the (–) terminals on both components using the side with no

line.

Red: positive (+)

Black: negative (–)

Subwoofer (INPUT1/OUTPUT terminals)

Connect the (+) terminals on both the subwoofer and the

amplifier using one side of the cable. Connect the (–)

terminals on both components using the other side of the

cable.

Red: positive (+)

Black: negative (–)

Before connecting

Remove the insulation coating at the extremity of each

speaker cable by twisting the coating off.

How to Connect:

White broken line

Note

Do not let the bare speaker wires touch each other as

this could damage the speaker or the amplifier, or both

of them.

Press and hold the terminal's tab, as shown in the

figure.

Insert the bare wire.

Release your finger from the tab to allow it to lock

securely on the cable's wire end.

Test the firmness of the connection by pulling lightly on

the cable at the terminal.

E-