- ページ 6

チラー Ecoplus 1/2 HPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ecoplus 1/2 HP 12 ページ。 Water chillers
Ecoplus 1/2 HP にも：取扱説明書 (12 ページ)

This chiller does NOT have an internal pump for system circulation.

An appropriately sized external pump is required.

CHOOSING THE CORRECT EXTERNAL PUMP

Required pump size depends on chiller model, water volume and rate of circulation. Recommended

pump sizes for effective water chilling are within the following ranges:

Chiller

Model

1/10 HP

1/4 HP

1/2 HP

TYPICAL INSTALLATION

For the most effective water cooling and energy efﬁciency, locate chiller below water level. If chiller

must be placed above reservoir level, make sure height above pump does not exceed 26 ft. (8m).

For best performance, keep hoses as short as possible. The sum of all hose lengths should not

exceed 25 ft. (7.6m).

Chilled water return

Reservoir

(separate from nutrient pump)

IMPORTANT! Always check the following before starting chiller:

 Water level inside the reservoir is correct and there are no leaks in any hoses or connections.

 Power supply is correct and the plug is inserted completely into the outlet.

 Double-check the whole system to make sure there are no breaks or clogs.

Installation

Max. Reservoir Volume

Gallons (Liters)

42 (160)

80 (300)

132 (500)

Chiller Pump

Rate of Circulation – Pump Size

Gallons Per Hour (Liters Per Hour)

66 - 317 GPH (250 - 1200 LPH)

264 - 660 GPH (1000 - 2500 LPH)

317 - 793 GPH (1200 - 3000 LPH)

WATER

LEVEL

Chiller

Hose

Adapter

FITTING

CONNECTION

Seal

Nut

Chiller