- ページ 14
カーレシーバー Caliber RCD264BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Caliber RCD264BT 20 ページ。 Cd/mp3 player car fm stereo radio
ページを印刷するSD/MMC card operations
This unit equipped with you a memory card
slot.
Using the SD/MMC card:
When you insert a SD/MMC card into the
memory card slot, the player will reading
the SD/MMC card automatically.
If insert a disc into the disc slot while read
the SD/MMC card, the unit will playing the
disc. If you want to play the file in the
SD/MMC card, press the
switch to SD/MMC mode.
SD/MMC memory card playing operation is
the same with the MP3 operation described.
Note:
- When reading the memory card, please
don't touch or take out the card.
- If following the instruction above, the unit
can't read the card, please check if the card
is in good condition, or take out the card and
then insert it into the card slot once more.
Aux Input operations
This car radio has an external auxiliary
input jack, it is compatible with audio output
from an MP3 music player.
So you can listen to sounds and music from
external devices, if you have plugged such
a player into the AUX IN jack. Press the
MODE
button to switch to the
or off.
MODE
button to
AUX
mode on
Bluetooth hands-free function
When linking up your mobile phone to this
bluetooth hands-free system, you can dial
or receive calls via this bluetooth device
while driving.
You can also transmit the audio data(music)
from a bluetooth mobile phone to the
CD/MP3 tuner.
Sound and pictures will automatically be
turn off when there is an incoming call.
Voice comes from your car speakers and
the built-in mircophone receives your voice.
You have to active automatic call
reception so that the mobile phone
accepts incoming calls automatically
(See the menu of the hands-free system)
In many countries, this is a prerequisite
for legal operation of hands-free
equipment while driving.
1. Pairing
1.1
During pairing, please activate your
mobile phone and input pairing code "
and confirm in your mobile phone.
1.2
If pairing succeed, the "
flashing on the LCD display. Otherwise, the
"
" will flashing continuously on the LCD
display.
NOTE:
After pairing has succeeded, if your phone
supports auto-connect then it will connect
automatically. If your mobile phone does
not support auto-connect then you will have
to manually connect.
2. Connect/disconnect
2.1
Connect
The bluetooth module of this car radio will
connect to mobile phone automatically after
pairing succeed. If connection succeeds,
"CONNECT" will be visible on the LCD
display, and the "
LCD display. Otherwise, if there is a
connection problem, the "
flash.
2.2
Disconnect
If bluetooth module has connected with
your mobile phone, turn off the ACC power
of the car or turn off the unit by pressing and
holding the
POWER
the bluetooth connect.
" will not
" will not flashing on the
" symbol will
button to disconnect
.
0000
"