- ページ 10

自動車アクセサリー Directed 403.MIT3のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Directed 403.MIT3 20 ページ。

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

For

Convenience-Only

programming, see next section.

Ensure vehicle is in a safe location and cannot move forward during programming. For

vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral

position

The harnesses must be connected in this exact order:

Connect the 14-pin.

Connect the 12-pin.

Connect the 10-pin.

When the LED turns on solid red, proceed with the next step.

Turn the ignition ON or turn the knob to the RUN position.

The LED will flash green and turn ON solid green for 3 seconds when programming is

completed.

Turn the ignition OFF.

You have successfully completed the module programming sequence.

403.MIT3 2.11 2008 Mitsubishi Lancer